Created Updated
NotePublic

2026-10-23 01:48

No summary yet.

PrevNote

Next

No newer accessible resource.

ChatGPT log 2026-10-24 23:36

AUTONOMOUS EXECUTION DIRECTIVE: CAPACITY ARCHITECTURE, AGENT-NATIVE ERGONOMICS & TIER 2 SELF-HOSTING FOR lkjscript

You are operating as the Principal Language Architect, Systems Compiler Engineer, and Autonomous Execution Engine for lkjsxc/lkjscript.

You have unrestricted YOLO-mode access to the development environment via MCP within this ChatGPT Pro session. All technical, architectural, syntactic, compiler, runtime, storage, verification, and integration decisions are pre-authorized in advance by the Owner (lkjsxc). You have broad autonomous authority to redesign internal representations, remove artificial capacity restrictions, evolve authoring and editing interfaces, refactor compiler and runtime subsystems, and integrate verified changes without stopping for routine confirmation.


A. Owner Objectives & Delegated Authority

  1. Primary Engineering Outcomes:
    • Eliminate Artificial Capacity Ceilings (WS1 & Related Representation Bounds): Stop spending development cycles accommodating arbitrary numeric caps or moving one constant at a time while leaving dependent ceilings intact. Make removal of artificial admission, authoring, inspection, validation, and compiler ceilings an observable engineering outcome across complete producer-consumer chains, while preserving passive resource profiling/telemetry and exact safety checks.
    • Complete Source-Driven Tier 2 Semantic Self-Hosting: Drive the docs/spec/selfhosting.md contract to completion so an lkjscript-written compiler consumes its complete authoritative source-graph closure (LKJSG001), owns structural and semantic admission and normalization without Rust semantic preprocessing or target lowering, emits both standalone Linux x86_64 ELF and canonical .lkja artifacts satisfying fixed-point and behavioral controls across the full acceptance profile $P_{\text{self}}$, and establishes measured same-process native phase reclamation.
    • Advance LLM-Driven Development Efficiency & Identity Economy: Minimize the total tokens, latency, context overhead, and repair turns required for an LLM agent to inspect, author, validate, and publish correct changes, while addressing canonical owner, metadata, and retirement growth at their actual architectural roots.
  2. Delegated Judgment & Architectural Freedom:
    • Your judgment in the live environment supersedes historical habits and any revisable mechanisms proposed in this prompt. Whenever live repository evidence shows a cleaner representation, a better ordering of dependencies, or a simpler design than a candidate mechanism described below, choose the better architecture and document the rationale and evidence.
  3. Single-Epoch Forward Velocity (No Legacy Compatibility Requirement):
    • Past versions, historical format compatibility, and transitional dual readers are not required (canonical_schema::SCHEMA_EPOCH: u16 = 1 is the sole product encoding epoch).
    • Supporting one current format does not license stale cache reuse or accidental reinterpretation of obsolete bytes: whenever you change a representation, schema, or identity contract, bind the new format deterministically and regenerate all maintained inputs (packages/standard, tools/selfhost/project, applications/lkjournal, examples/*) coherently.
  4. Language & Session Discipline:
    • Write all internal reasoning, tool calls, code comments, commit messages, decision records, specifications, and docs/status.md updates in concise, high-density technical English.
    • Perform all work inside the current ChatGPT Pro / MCP session. Do not invoke separately billed external model or Codex APIs unless explicitly requested by the Owner.

B. Non-Negotiable Soundness & Operating Invariants

Preserve these invariants across every change:

  1. Complete Supplied-Source Admission:
    • Semantic validation must check the entire supplied owner and type inventory, including uncalled functions, unused declarations, unused implementation methods, untaken branches, and unused supplied type descriptors. Entry/target selection may determine what executable code is emitted, but must never filter or skip semantic validation of supplied definitions.
  2. Semantic, Ownership, Effect & Witness Soundness:
    • Preserve exact lexical scoping, 12-class namespace uniqueness, structural-type DAG acyclicity, non-expansive nominal recursion, callable generic finite-flow admission, explicit OwnedContract/OwnedImplementation witness checking, pure vs. task effect discipline, and affine custody (ByteBuffer, Region, Owned records/sequences/products/choices, consume move vs. scoped read/borrow).
  3. Separation of Passive Telemetry from Active Enforcement:
    • Saturating counters (u64::saturating_add) are appropriate for passive observation and profiling reports. Passive counters must never size buffers, prove offsets valid, authorize capability grants, or silently enforce quotas.
    • Conversely, when a caller, deployment descriptor, or test harness explicitly selects a finite quota (Some(limit)), enforcement must remain exact (admitting exact-fit and rejecting one-over with DiagnosticClass::Resource). Define 0 vs. None consistently at every API and wire boundary so an "unmetered" sentinel never misinterprets an explicit caller request for zero allowed work.
  4. Checked Arithmetic, Extent Proofs & Independent Oracles:
    • Preserve checked arithmetic (checked_add, checked_sub, checked_mul, division-before-multiplication range proofs) and fallible host allocation reservations (try_reserve / try_reserve_exact) before allocating buffers or advancing cursors.
    • Preserve implementation independence between the production normalized bytecode VM and the canonical reference interpreter (reference.rs / reference_intrinsics.rs).
  5. Repository Safety & Policy Gates:
    • Preserve #![forbid(unsafe_code)], clippy::unwrap_used = "deny", clippy::expect_used = "deny", clippy::panic = "deny", clippy::todo = "deny", and policy no-python.
    • Operate within the single checkout and single coordinated leased Cargo target ($PWD/target).

C. Observed Starting Evidence (Snapshot as of 2026-10-24)

Reuse the observations below as navigation hints, then reconcile the live repository, authoritative project, active jobs, and existing receipts before choosing work. Do not reset to an old baseline or assume that supplied measurements remain current.

Always distinguish five distinct states:

  1. Checked-out Git commit and working-tree changes.
  2. Authoritative canonical project revision (tools/selfhost/project/HEAD).
  3. Completed targeted verification (e.g., focused cargo test filters and isolated measurements).
  4. Completed full acceptance for an exact staged source tree (bootstrap-verifier.sh + verify.sh + 29 fresh check full gates + release target).
  5. Commit and tree actually integrated into origin/main.

Snapshot at Commit 4165156d4d4c9726af61199d34f9b1b2053b9ef3 (2026-10-24)

  • Observed Git HEAD: 4165156d4d4c9726af61199d34f9b1b2053b9ef3 ("selfhost: lower scalar intrinsic calls from source", parent 01c805a202b258a1a9241f1edafd5feaa7655ce1).
  • Recorded Acceptance Status at 4165156 (docs/status.md, docs/decisions/20261024-source-scalar-intrinsics.md):
    • Commit 01c805a202b258a1a9241f1edafd5feaa7655ce1 is recorded as the accepted main baseline.
    • At 4165156, the canonical intrinsic transaction (transaction_695480dd...) and joined targeted controls (selfhost_source_scalar_, selfhost_source_measure_maintained_native_closure, selfhost_source_profile_inventories_every_owner_and_type, and isolated GC reachability measurement) succeeded, while full publication acceptance gates (bootstrap-verifier.sh, tools/selfhost/verify.sh, check full --fresh --machine --jobs 4, and release target) remained outstanding at the time 4165156 was recorded.
  • Maintained Compiler Project State at 4165156:
    • Revision: rev_dd94b401eb30277e5289bbc9d651230337edcd6b1391e46fabcd92c0fe38d427
    • Semantic state: semantic_state_706b6db4ae98c6adb7511c56da0e893974a45585b91fbaf48e8e38593870fa19
    • Complete LKJSG001 carrier: 8,110,321 bytes (SHA-256 b800b61e8d90d6c507fa9918130bc629bdbad491b9d9ec38f79b28beeaa64177), containing 72 modules, 582 callables (559 pure functions + 23 external declarations), 33,919 live canonical owners, 35 supplied type objects, and 11,651 retirement records.
    • Mode-1 LKJCI1 (profile 5) & .lkja output: 9,155,057 input bytes across 586 units (SHA-256 c868e4d5...) $\to$ 9,675,994 .lkja bytes (C1 = C2 = C3 SHA-256 6dab0ce9...).
    • Mode-0 LKJCI1 (profile 4) & ELF outputs:
      • Tier 1 backend closure (compile-elf): 244 functions, 16,456 nodes, 832,576 input bytes $\to$ 2,590,880 ELF bytes (C2 = C3 SHA-256 55eaea3f...).
      • Combined source frontend + backend closure (compile-source-elf): 566 functions, 34,469 nodes, 31 normalized types, 1,672,927 input bytes $\to$ 5,312,463 ELF bytes (C1 = C2 SHA-256 70a6e0ab...).
    • Physical storage observations: 346 pack files (419,166,252 bytes) in tools/selfhost/project/packs. An isolated public GC copy measured 231,731 reachable historical objects (497,593,841 canonical bytes), compacting 346 packs into 16 packs (397,154,190 bytes, reclaiming 22,012,062 pack bytes) while leaving the original project uncompacted.
  • Recently Completed Slices (Context for What Already Exists):
    • Quota & Capacity Removals: 2144fc8 (removed default GC preparation & receipt/evidence ceilings and status.md line/word limits), a8c4d1c (removed default cumulative execution quotas in RunPolicy::default() / NormalizedRunPolicy::default()), d225e8c (growable native stdin mappings removing the 16 MiB cap), 3556e58 (removed mode-1 8 MiB and 31-bit allowance caps via profile 5), 75fefba (removed standalone 32,768 MAX_NODES cap in mode-0, deriving capacity from the 8 MiB mode-0 layout bound), and 01c805a (removed the 8 MiB aggregate byte ceiling in source-graph::validate and source-index::bounds).
    • Source-Driven Admission & Scalar E2/E3 (LKJSG001): Restricted E1 (352f099, 1377173, 3bbd8a9, 19d012f, d9166ad, 9c2660c, 9eaaad6) plus scalar E2/E3 (2824d94, 4165156), which admits and lowers pure monomorphic Unit/Bool/I64 functions, locals, If, Let, Sequence, direct calls, and 8 exact I64/Bool external intrinsics (core.i64.{add,subtract,multiply,divide,equal,less}, core.bool.{and,or}) with one () -> I64 command Target, and replaced the default 10M composed_callable_flow work rejection with None (passive telemetry).

D. Immediate Reconciliation Procedure

Before mutating files, perform a focused reconciliation of the live environment (handling optional missing directories only around the du command so earlier failures are never masked):

git status -sb && git rev-parse HEAD && git log -n 5 --oneline && df -h .
du -sh target .artifacts tools/selfhost/project/packs 2>/dev/null || true
  1. Inspect AGENTS.md, docs/status.md, active background jobs/leases, and .artifacts/ receipts to determine whether the live tree is at 4165156 (with full acceptance still pending) or whether newer local/remote commits or receipts exist.
  2. If 4165156's full publication acceptance is still pending:
    • You may either complete its acceptance first, or combine it with one closely related, well-scoped successor change and run full acceptance for the combined frozen candidate—provided the resulting candidate satisfies both sets of obligations and your report/decision record states clearly what was verified and accepted. Do not chain multiple unaccepted slices indefinitely without closing acceptance.
  3. Inspect the current whole-inventory profile and relevant source files to identify the next concrete capability or capacity dependency.

E. Execution Policy & Sequencing Principles

  1. Outcome-Driven Sequencing:
    • Choose and complete a coherent change that advances a named Owner objective (Section F / Section G / Section H).
    • You do not need to finish every possible quota change before making semantic self-hosting progress, nor may semantic progress indefinitely defer the Owner's mandate to eliminate artificial ceilings. Let demonstrated dependencies and architectural leverage determine the sequence.
  2. Coherent Completion Across Producer-Consumer Chains:
    • When removing a capacity restriction or extending a language/compiler capability, complete the change coherently across its producers, consumers, representations, and tests.
    • Do not declare a capacity change complete while the same target workload immediately hits a coupled artificial ceiling in the same pipeline. Choose commit boundaries for clean verifiability and integration while keeping the architectural outcome explicit.
  3. Capability-Before-Adoption Ordering:
    • Whenever the self-hosted compiler (tools/selfhost/*.lkjc) will newly adopt a language construct, runtime feature, or representation change:
      1. Specify the exact semantics and contract.
      2. Implement the required host/runtime/backend support while compiler source still uses the previously admitted profile.
      3. Verify that support with independent programs across VM, canonical reference, and native execution paths.
      4. Extend LKJSG001 source decoding, semantic admission, and lowering.
      5. Adopt the capability in tools/selfhost/*.lkjc via public transactions (lkjscript tx).
      6. Re-establish all required self-hosting fixed points and behavioral controls.

F. Capacity Architecture Contract (Replacing Artificial Ceilings Coherently)

To fulfill the Owner's mandate against arbitrary limits without breaking safety or termination guarantees, classify every bound you encounter according to this table and treat its entire enforcement path:

Boundary CategoryRequired Engineering Treatment
Default cumulative work or admission quota (e.g., default validation steps, default authoring/change budgets, default inspection limits)Remove the default rejection (None by default); record work via passive saturating counters (u64::saturating_add). Preserve exact enforcement only when a caller/deployment explicitly supplies Some(limit).
Aggregate capacity caused by a fixed representation (e.g., single-leaf 700-unit map, narrow count/offset fields, signed-31-bit allowance domain, fixed mode-0 table caps)Redesign the representation and every dependent producer/consumer (e.g., multi-page hierarchy, wider or unmetered allowance encoding, dynamic table layout) with checked conversions.
Host-stack dependence (e.g., recursive AST/type/evaluator walks or deep non-tail native call chains)Use a stack-safe algorithm or execution mechanism (explicit heap-allocated worklists/state machines across all consumers, and tail-call or trampoline lowering).
Bounded physical pages or chunks (e.g., 64 KiB radix-map pages, 32 MiB pack partitions, I/O read chunks)Keep the per-page/chunk invariant where useful, but allow an expandable collection/hierarchy of them so aggregate program/repository size is not artificially capped.
Arithmetic, extent, and integrity checksPreserve exact checks (checked_add, checked_mul, division-before-multiplication extent proofs, BLAKE3 digest verification, try_reserve_exact).
Finite-progress or cycle-detection reasoningPreserve or replace with a valid mathematical termination argument (e.g., finite input cursor advancement, strictly decreasing unresolved counts, or structural DAG / SCC checks).
Explicit deployment or test-harness policyKeep distinct from language and compiler admission; honor explicit sandbox/harness limits when configured.
Physical address-space or instruction-encoding boundary (e.g., x86_64 rel32 displacement or OS mmap failure)Handle honestly through representation design (e.g., compact codegen or 64-bit addressing) or precise resource/capacity diagnostics.

Critical Enforcement-Path Rules

  1. Audit Clamping & Validation Helpers, Not Just Top-Level Constants:
    • Do not merely change a default constant or replace a number with usize::MAX. Inspect the full call chain for hidden clamps and ceiling checks:
      • For example, in src/platform/kernel/validate.rs, validate_full_checked clamps its supplied maximum_work via maximum_work.min(MAXIMUM_VALIDATION_WORK).
      • In src/platform/change/budget.rs, ChangeBudget validates caller-declared maxima against MAXIMUM_CHANGE_* implementation ceilings (validate_maximum(dimension, maximum, ceiling)).
      • Audit unwrap_or(DEFAULT_LIMIT) fallbacks, serialized policy descriptors, parser/decoder limits (maximum-input-bytes, maximum-structural-tokens, maximum-structural-syntax-nodes, default-authored-identities), inspection/query/draft limits, package-source collectors, and associated/read-view/region preparation chains.
  2. Audit All Consumers Before Removing Depth Guards:
    • Note that some depth-guarded validators in validate.rs already use explicit pending vectors (worklists) while still enforcing depth numbers (1,024 / 256), whereas other passes (parsing, inference, comparison, lowering, serialization, value destruction, and reference evaluation in reference.rs) may still use host-stack recursion.
    • Before removing a structural or type depth guard, audit every consumer of that structure (parsing, validation, inference, comparison, lowering, serialization, drop/cleanup, and both evaluators) so newly admitted depth cannot trigger a host stack overflow downstream.
  3. Coherent Representation Audits for LKJSG001 & LKJCI1 Mode 0:
    • In LKJSG001, the current signed-31-bit proof-allowance domain (<= 2,147,483,647) combined with 4096 + 128*L + 1024*N imposes L <= 16,777,183 - 8*N, alongside the 100,000 combined directory-entry cap and per-object caps (4 MiB owner, 1 MiB type, 64 KiB inline text).
    • In LKJCI1 mode 0 (source-scalar-pack.lkjc, input.lkjc, selfhost_input.rs), profile 4 still retains the 8,388,608-byte input bound, 2,147,483,647 signed-31-bit fuel cap, 1,024 callable-row cap (566 already used by the combined frontend), and 128 local/operand-depth caps.
    • Note that lkjscript values use signed I64; supporting unmetered (0) or wider positive allowances across Rust and self-hosted lkjscript requires matching producer, reader, comparison (e.g., high/low word or nonnegative I64), and diagnostic updates across both sides.

G. Self-Hosting Roadmap & Full Tier 2 Contract ($S_{\text{compiler}}$, $F_{\text{active}}$ & $P_{\text{self}}$)

1. Keep Three Scopes Strictly Distinct

Never conflate these three concepts in code, specifications, or status reports:

  • $S_{\text{compiler}}$: The exact maintained compiler source closure (tools/selfhost/project, currently 72 modules at rev_dd94b401...).
  • $F_{\text{active}}$: The subset of language and runtime features actually used by $S_{\text{compiler}}$ as established by a current whole-inventory profile bound to the live canonical revision.
  • $P_{\text{self}}$ (Complete Tier 2 Acceptance Profile): The full profile required by docs/spec/selfhosting.md, which includes $S_{\text{compiler}}$ plus independent programs exercising all declared Tier 2 families—including families not currently used inside $S_{\text{compiler}}$ itself (such as nominal owned-record/owned-choice and Match, first-class functions/closures and invoke, explicit OwnedContract/OwnedImplementation witnesses, associated owned types, source-tied ReadViews, and lexical Regions).

2. Derive $F_{\text{active}}$ from the Live Canonical Inventory

  • Treat docs/decisions/20261022-active-compiler-profile.md (recorded at 62 modules) together with the updated counts in docs/status.md and docs/decisions/20261024-source-scalar-intrinsics.md (72 modules, 559 pure functions, 23 externals, 24 structural record types, 146 Text expressions, 91 List expressions, 14 generic application sites, 1 borrow parameter, 159 consume parameters) as recorded evidence.
  • Before implementing the next E2/E3 vertical slices for $S_{\text{compiler}}$, inspect the live canonical inventory (selfhost_source_profile_inventories_every_owner_and_type and tools/selfhost/input.lkjc) to verify the exact external intrinsics and types required—including Bytes, Text, ByteBuffer (consume and borrow on ci::size), List<I64>, generic list operations (core.list.get, core.list.length), byte/hashing intrinsics (core.bytes.from-list, core.bytes.blake3, core.bytes.blake3-derive-key, slicing, encoding), and structural records.

3. Essential Dependencies for Source-Driven Self-Compilation of $S_{\text{compiler}}$

To move from the current scalar source-to-ELF path (compile-source-elf) to compiling $S_{\text{compiler}}$ from raw LKJSG001, your design and roadmap must address all four of these technical requirements:

  1. Explicit Target Selection & Binary-Filter Entrypoint Signature:
    • The current scalar target checker requires a single command target with signature () -> I64.
    • However, the compiler's own entrypoints (compile-elf, compile-source-elf) use the binary-filter signature: $$(\text{Bytes}) \to {\text{diagnostic}: \text{I64},\ \text{image}: \text{Bytes}}$$
    • Therefore, target selection must not only select an explicit target when multiple targets exist in a carrier (while still validating the entire supplied owner/type inventory), but must also admit the (Bytes) -> {diagnostic: I64, image: Bytes} command port signature, validate its component and port bindings, and define how the requested target selector enters the deterministic compilation input without trusting host-supplied semantic tables or pre-lowered code.
  2. Whole-Inventory Generic Admission vs. Closed Specialization:
    • Even though $S_{\text{compiler}}$ has only a small number of closed generic call sites (e.g., over List<I64>), whole-inventory semantic admission must validate all supplied generic declaration templates, type parameters, bounds, and substitutions (including unused declarations), while deterministically specializing the concrete instantiations required for lowering.
  3. Affine ByteBuffer Custody, Branch Reconciliation, Borrow Lifetimes & Stack-Safe Execution:
    • $S_{\text{compiler}}$ relies heavily on recursive scanning helpers (135 recursive SCCs and 585 syntactic tail-call contexts at the 62-module inventory) and affine ByteBuffer threading (159 consume parameters, 1 borrow parameter).
    • Current scalar E3 lowers calls in tail position as ordinary Call/Return. On large carrier inputs (especially once quotas are removed), ordinary Call/Return across deep recursive scans risks native call-stack overflow!
    • Therefore, assess and implement stack-safe lowering (exact tail-call lowering or iterative/trampoline execution) integrated with affine custody and lexical cleanup:
      • Derive each binding's instantiated type and custody state.
      • Reconcile asymmetric branch consumption with explicit disposal on non-consuming branches.
      • Keep borrowed call operands live until the call completes.
      • Emit reverse-lexical disposal for surviving unreturned owned locals at scope/function exit.
      • Determine when a syntactic tail call has no surviving owned locals requiring post-call cleanup (and is thus eligible for TailCall frame reuse) versus when surviving owned locals require Call + cleanup + Return.
  4. Source-Driven Canonical .lkja Unit Derivation (Distinct from Mode-0 ELF Lowering):
    • Currently, Tier 1 artifact mode (mode 1 / profile 5) receives Rust-projected canonical unit fields (selfhost_artifact_input.rs), which include source identities, interface/implementation/type/effect/capability/validation-dependency digests, signatures, parameter modes, ordered reference tables, type arguments, canonical instructions, and unit keys.
    • Mode-0 ELF lowering does not automatically produce these canonical .lkja unit fields.
    • To achieve source-driven .lkja emission from LKJSG001, design and implement source-derived canonical compilation unit construction (for example, a shared admitted semantic plan over LKJSG001 with two lowering backends: one to mode-0 native emission and one to canonical LKJCUNIT descriptors/tables fed into unit-wire, hierarchical unit-map, and artifact::compile-admitted).

4. Authoritative Fixed-Point & Acceptance Equations

Maintain the specification's exact distinction between Tier 1 normalized-input fixed points and Tier 2 source-driven fixed points:

Let $S$ be the complete authoritative LKJSG001 source carrier, $E$ be the target Linux x86_64 ELF environment, and $C_0$ be the documented Rust bootstrap compiler: $$C_1 = C_0(S, E), \qquad C_2 = C_1(S, E), \qquad C_3 = C_2(S, E)$$ Tier 2 native self-reproduction requires exact byte equality: $$\operatorname{bytes}(C_2) = \operatorname{bytes}(C_3)$$ and for canonical .lkja artifact emission $A_i = C_i(S, \mathrm{lkja})$: $$A_1 = A_2 = A_3$$ where $C_1, C_2, C_3$ execute as standalone binaries that consume raw LKJSG001 and own structural/semantic admission and lowering without Rust semantic preprocessing or normalized sidecars.

Always pair fixed-point checks with:

  • Meaningful compiler-source behavioral mutations (proving emitted stages change behavior/output when LKJSG001 source changes).
  • Independent programs across the admitted profile (and across full $P_{\text{self}}$ before claiming Tier 2 completion).
  • Layer-reaching negative fixtures (freshly hashed/rebound carriers that pass all earlier layers and fail at the exact intended validator diagnostic 6, 12, 13, 14, 15, 16, 17, 18, 19, etc., plus direct derived-graph cycle controls where content-addressed hashes prevent cyclic raw carriers).

H. Candidate Architectural Directions & Revisable Mechanisms

Evaluate the five architectural candidates below against live repository evidence. Their names, concrete syntax, and internal mechanisms are revisable—adopt, refine, or replace them based on measured engineering trade-offs:

Candidate 1: Hierarchical Multi-Page unit-map Emission (tools/selfhost/unit-map.lkjc)

  • Context & Rationale: unit-map::encode already computes the canonical logical radix-map content digest, but physically emits only a single leaf page (107 + p + U(88 - p) bytes, capped at 65,536 bytes $\implies U \le 700$). The maintained compiler is at 586 units (4165156).
  • Acceptance Questions & Contract:
    • Emit a valid multi-page radix hierarchy (retaining the 64 KiB per-page format bound while removing the 700-unit aggregate ceiling) and include all child pages in the emitted .lkja object inventory and pack.
    • Verify empty, singleton, split-boundary, and multi-level unit maps (including $> 700$ units), exact parent summaries, logical-content commitments, strict loader acceptance, and deterministic physical layout/ordering so $A_1 = A_2 = A_3$ byte equality holds.

Candidate 2: LLM-Ergonomic Authoring, Minification & Identity-Aware Editing

  • What Already Exists (Do Not Duplicate):
    • lkjscript tx already accepts self-delimited (tx ...) expressions without physical newlines (input::parse_expression treats ASCII LF as ordinary whitespace; newlines only advance line/column counters).
    • Canonical ExpressionOperation::Let { bindings, body } and Sequence are already n-ary vectors in the meaning graph and structural parser (source-scalar-pack.lkjc already uses multi-binding lets).
    • Meanwhile, the mixed proposal format (.lkjc) uses line-oriented markers (request base=..., declarations.begin, expression.block as=$ROOT, expression.end) and ; line comments.
  • Optimization Objective:
    • Minimize total tokens, latency, and repair effort required to obtain a correct, validated, accepted change (accounting for context inspection, edit generation, tool output, diagnostics, and retries—not unverified character-count claims).
  • Separate Syntax Savings from Graph/Storage Savings:
    • Recognize that surface shorthand (shorter keywords, literal shorthand, or whitespace-minified transactions) reduces authoring text only, whereas reducing canonical OwnerRecord counts or retirement churn requires either fewer generated expression/binding owners, better identity preservation across edits, or scoped identity/storage organization.
  • Concrete Experiments & Improvements to Evaluate:
    1. Newline-Independent Compact Serialization: Ensure every supported authoring and transaction operation has an unambiguous compact serialization without mandatory physical newlines (while keeping readable formatting optional and preserving literal contents, token boundaries, comment delimiters, and diagnostic attribution).
    2. Concise Revision-Bound Projections & Identity-Aware Editing: Improve query / inspect / change draft / tx so an agent can inspect and patch specific functions or expressions with minimal surrounding boilerplate while preserving unchanged child/expression/binding identities (avoiding whole-body retirement churn when only a sub-expression changes).
    3. Targeted Authoring Forms (e.g., Pipeline or cond Sugar vs. Canonical Ops):
      • If introducing buffer-threading pipeline syntax or multi-branch cond, explicitly specify argument position (note that many ByteBuffer helpers take the buffer as the final argument!), evaluation order, affine consume vs. borrow rules, cleanup on early exit, and diagnostic locations.
      • Explicitly decide and measure whether a construct should be pure authoring sugar (zero backend/validator surface expansion) or a canonical graph operation (weighing any owner reduction against the cost of updating validation, codecs, reference execution, lowering, inspection, and self-hosted admission).
    4. Empirical Evaluation: Compare existing .lkjc proposals, existing tx syntax, whitespace-minified tx, and any candidate shorthand or editing interface across representative compiler bodies, multi-declaration updates, and generic/owned/effectful code using deterministic local measurements.

Candidate 3: Storage Compaction, History Retention & Identity Economy

  • Keep Four Mechanisms Distinct:
    1. Physical Pack Compaction (lkjscript gc): Rewrites reachable objects into deterministic deflate-compressed packs (32 MiB target framing) without changing semantic state or unreachable-object rules. (At 4165156, isolated GC compacted 346 packs / 419.17 MB to 16 packs / 397.15 MB, retaining 231,731 reachable historical objects).
    2. Historical Revision Ancestry: Past revisions, transaction records, and receipts reachable through parent pointers.
    3. Current Retirement Records (11,651 in tools/selfhost/project): Currently part of the semantic-state digest and LKJSG001 carrier directory.
    4. Identity Granularity (docs/decisions/20260825-identity-economy.md): The existing Proposed design to retain durable global identities for major declarations while using scoped continuity tokens for fine-grained members, expressions, and bindings.
  • Acceptance Contract for Any Reseed or Identity Redesign:
    • Reassess 20260825-identity-economy.md, better edit-time identity preservation, and/or an explicit Horizon Reset / Reseed mechanism.
    • If you implement a history/retirement reseed or scoped-identity cutover, you must specify and verify a complete identity contract:
      • Whether repository or package identity changes or is preserved.
      • Which live declaration/member/type identities remain valid.
      • How stale references, prepared plans/tokens, and idempotency keys are rejected or invalidated.
      • How witnesses, receipts, and dependent artifacts behave.
      • How the new complete closure and semantic-state are validated and atomically published (keeping graph-history reseeding strictly separate from Git-history rewriting).

Candidate 4: Compact Native Code Layout (tools/selfhost/machine.lkjc & elf.lkjc)

  • Context: The self-hosted native emitter currently reserves 512 bytes per function header and 128 bytes per normalized instruction (65536 + 512*F + 128*N + B), padding unused bytes in each slot with 0x90 NOPs (a single normalized instruction may emit multiple x86_64 instructions).
  • Acceptance Contract:
    • If replacing fixed-slot padding with a multi-pass or offset-table layout becomes worthwhile for image capacity or performance, specify and verify:
      • Exact function and instruction offset calculation and alignment.
      • Literal/data placement and checked relocation arithmetic (rel32 / u32 bounds checks matching the Rust assembler's safety guarantees, or a wider addressing mode where needed).
      • Exact agreement between pass-1 size measurement and pass-2 byte emission (including branch relaxation if instruction length varies).
    • Benchmark the exact same semantic workload before and after, reporting image byte size, compilation time, execution time, and memory separately without unmeasured cache or speedup claims.

Candidate 5: Native Phase Reclamation & Lexical Region Lifetimes

  • Context: Native heap mappings (src/platform/compiler/elf_x86_64/ and tools/selfhost/heap.lkjc) currently remain process-owned until exit(60). Full Tier 2 requires both language-level lexical Region support in native execution and measured same-process native phase reclamation.
  • Complete Lifetime & Reclamation Contract:
    • A simple bump-pointer watermark is insufficient when the allocator acquires multiple OS mmap segments or when surviving values reference interior buffers. Your design must establish:
      1. Explicit Allocation Domains: Separate persistent input backing, phase-local scratch storage, surviving phase results, frozen region slabs, and allocator segment metadata (tracking all OS mappings belonging to a region/phase).
      2. Deep Survivor Promotion / Non-Escape: Define which values may survive a phase and ensure that everything reachable from a surviving value (including backing bytes for slices, lists, and records) is either promoted/copied into the surviving domain before phase reset or statically proved non-escaping. Copying only a top-level descriptor while leaving its backing bytes in reclaimed scratch storage is unsound.
      3. Failure, Trap & Nested Scope Cleanup: Define behavior across nested regions/phases, compilation rejections, traps, and cancellation.
      4. Three Distinct Memory Observations: Distinguish (a) logical scratch storage becoming reusable by subsequent phases, (b) virtual mappings being unmapped/returned to the OS, and (c) resident set size (RSS) behavior.
      5. Same-Process Multi-Iteration Verification: Verify reclamation by running repeated compilation/validation phases after warm-up within the same native process (explicitly stating whether per-iteration outputs are discarded or retained, and testing alternating input sizes and failure paths), reporting requested allocation, live retained bytes, mapped arena capacity, and process RSS separately.
      6. Language-Level vs. Compiler-Internal Reclamation: Ensure compiler-internal phase reclamation complements rather than replaces the declared Tier 2 requirement for native lexical Region capabilities (region-with, region-alloc, region-read, region-write, region-freeze, region-mmap-save, region-mmap-load).

I. Verification, Staged-Tree Acceptance & Integration Protocol

  1. Focused Iteration Checks:
    • During development of a slice, run fast, layer-appropriate checks (e.g., targeted cargo test --release --locked --lib <filter> -- --test-threads=1 --nocapture and bash tools/selfhost/verify.sh when touching selfhost/native paths).
  2. Candidate Preparation & Quiescence:
    • Complete all Rust source, tools/selfhost/*.lkjc proposals, tests/support/selfhost_proposals.rs, tools/selfhost/project transactions (lkjscript tx), generated docs (lkjscript capabilities --generate-docs docs/generated if public capability surfaces changed), decision records (docs/decisions/), specifications, and docs/status.md updates.
    • Review git status and git diff carefully. Stage only the intended candidate paths (git add <paths> or git add -A once every working-tree change is verified to belong to the candidate).
    • Keep the working tree completely quiescent throughout bootstrap and gate execution.
  3. Staged-Tree Verifier Bootstrap & Complete Gate Execution:
    • Bind --expected-source to the current base HEAD commit, --expected-tree to the staged candidate tree (git write-tree), and --output to an absent absolute directory path:
      candidate_tree=$(git write-tree)
      base_commit=$(git rev-parse HEAD)
      owned_evidence_dir="$PWD/.artifacts/verifier-bootstrap/tree-$candidate_tree"
      rm -rf "$owned_evidence_dir"
      verifier_root=$(bash tools/bootstrap-verifier.sh --expected-source "$base_commit" --expected-tree "$candidate_tree" --output "$owned_evidence_dir")
      bash tools/selfhost/verify.sh
      "$verifier_root/lkjscript-dev" check changed --machine
      "$verifier_root/lkjscript-dev" check full --fresh --machine --jobs 4
      "$verifier_root/lkjscript-dev" release target
      
    • Inspect the actual gate outcomes in .artifacts/lkjscript-dev/latest-receipt.json and the focused evidence receipts. All required gates in the current registry must pass freshly with stable inputs. If any file in the candidate tree changes after bootstrap, re-run acceptance for the new staged tree before committing.
    • Clean up transient multi-megabyte stage binaries and owned temporary copies only after their hashes, byte comparisons, and receipts are recorded, while preserving required milestone acceptance receipts.
  4. Normal Integration & Continuous Autonomous Loop:
    • Commit the verified staged tree (git commit -m "...") and verify git rev-parse HEAD^{tree} == "$candidate_tree".
    • Integrate via the repository's normal route (git push origin main after verifying remote ancestry and incorporating any intervening remote work cleanly without force-pushing).
    • After integrating a slice, immediately reassess the updated baseline and continue to the next highest-leverage slice while session capacity remains.

J. Final Reporting Contract

In docs/status.md, decision records, and your session reports, always report these six items distinctly and concisely:

  1. Implemented Capability / Capacity Change: Exact semantics, representations, or quota removals completed.
  2. Actual Validation & Measured Telemetry: Exact commands run, gate counts, fixed-point digests, and separate observations for work counters, physical pack bytes, carrier bytes, and native memory.
  3. Remaining Limitations & Capacity Boundaries: Which WS1 bounds, representation limits, or Tier 2 families remain open.
  4. Tested Source & Carrier Identity: Exact base commit, staged tree hash, canonical project revision (rev_...), semantic-state digest, and complete LKJSG001 carrier SHA-256.
  5. Integrated Remote Identity: Exact committed SHA and verified origin/main integration status.
  6. Next Concrete Dependency: The immediate next capability or capacity slice unlocked by this work.

K. Immediate Action (Start Now)

  1. Run the Section D reconciliation commands to inspect the live checkout, docs/status.md, active leases/jobs, disk/pack usage, and whether commit 4165156's full acceptance gates are still pending or already completed.
  2. Reconcile the current canonical compiler inventory (selfhost_source_profile_inventories_every_owner_and_type) and active capacity boundaries (586 / 700 mode-1 units, LKJSG001 / mode-0 allowance and layout domains, and WS1 kernel/change/authoring quotas).
  3. Select the highest-leverage next slice (closing 4165156 acceptance alone or together with a tightly coupled slice such as hierarchical unit-map emission, a coherent WS1 quota/representation sweep, or the next source-driven E2/E3 increment for explicit Target + (Bytes) -> {diagnostic: I64, image: Bytes} / Bytes / structural records), execute end-to-end, verify via the staged-tree protocol in Section I, integrate, and continue.\

まず、開発環境の現在のコミット・未確定変更・実行中ジョブ・検証記録を照合します。lkjyolo:manage-coder スキルで既存のチェックアウトを確認し、未完了の受け入れ検証と次の実装候補を判断したうえで、検証・GitHub への統合まで進めます。

セレクタードキュメントを準備した

永続マップと自己ホスト成果物の仕様実装テストを確認 計画し養子縁組ディレクトリを作成した

永続マップと自己ホスト成果物の仕様実装テストを確認

lkjyolo MCPの連携を使用しました 実装したセレクター変更とユニットマップ配置を確認

永続マップと自己ホスト成果物の仕様実装テストを確認 設計了頁面編碼與樹狀輸出緩衝結構

設計した子スキャン結果とバッファレコード

lkjyolo MCPの連携を使用しました 確認したルート数の上限

永続マップと自己ホスト成果物の仕様実装テストを確認 精緻化した境界テストキー

永続マップと自己ホスト成果物の仕様実装テストを確認 更新されたキャパシティバンドルのテスト

永続マップと自己ホスト成果物の仕様実装テストを確認 確認済みバンドル数の割当制限

確認生成範囲の処理

lkjyolo MCPの連携を使用しました Target 選択変更について、検証時のツリー・正規ソース・実行ファイル・結果記録のハッシュが現在も一致しています。追加の check changed は実行中で、これまでに確認できたテストに失敗はありません。待ち時間には、ページ分割の境界と、子ページを含めた artifact の検証方法を詰めています。

Rustのユニットマップ変換を設計した

lkjyolo MCPの連携を使用しました 確認したDirect ByteBufferのコンパイル

Bytebuffer 調査の結果、論理的な map の内容ハッシュは既存実装で計算できており、変更が必要なのは物理ページの生成と格納です。空・単一要素・ページ境界の前後・3 階層になる入力を確認し、さらに 700 単位を超える実際のパッケージを strict loader で読み直す検証を用意します。

作成したRust入場ガード

lkjyolo MCPの連携を使用しました 評価したパック圧縮とページエンコーディング

lkjyolo MCPの連携を使用しました GitHub の main も現在の基準コミットと一致しており、別の変更が先に入った形跡はありません。700 単位の制限については、Rust 側の入力生成と lkjscript 側の入力検査の両方にある拒否条件を特定しました。ページ階層化と一緒に変更し、u32 の長さ・オフセット検査は維持します。

確認・レビュー・監視・テスト結果の取得と公開を完了 セレクター検証を確認した

lkjyolo MCPの連携を使用しました 確認したレコード出力とコンパイラ深度

独立ローダーを確認した

lkjyolo MCPの連携を使用しました 追加検証では、ライブラリ側で 1,322 件、公開 CLI 側で 346 件の成功を確認できており、現在も残りのテストが進行しています。ページ階層化の変更案は、検証対象のファイルを動かさずに準備中です。入力形式の検査と任意の実行予算は、それぞれの役割を保つ方針です。

lkjyolo MCPの連携を使用しました マップエンコーダーを作成しシグネチャを更新

古いエンコードを改名し非公開ノードヘルパーを構築

確認しエンコードAPIを改善

確認したコンパイルガードとプール長ガードを追加した

追加されたアーティファクト境界ヘルパー

確認するブランチの空き状況とエージェント応答を待機

取得した監査・テスト実行結果を集計 設計したエンコードとページ用ヘルパー

map関数のソースコードを記述した

プールカーソルのチェックを追加した

階層化の処理は、固定長の 17 バイトのキーを使って終了を保証できます。各分岐で共通接頭辞が長くなり、同じ階層では入力位置が前進する設計にします。これなら、単位数の上限を増やす方法や、新しい深さ上限に頼らずにページを増やせます。

新しいマップ関数を設計し構文と組み立てを検証

lkjyolo MCPの連携を使用しました ルートロジックを確認した

確認した tool 可用性

同じ候補ツリーに対する追加の check changed を確認し、完了したら検証済みの Target 選択変更を統合します。待機中は追跡対象ファイルを変えず、次の単位マップ階層化について、全ページの格納処理と独立した検証を準備しています。

lkjyolo MCPの連携を使用しました 実装済みルート成果物とマップ行パーサーヘルパー

設計した厳密なフレームパーサー

700 単位の制限は、入力側だけでなく、単一ページを前提とする成果物組み立てにも結び付いています。次の変更では全ての子ページをオブジェクト一覧と pack に含め、64 KiB のページ境界、親の集計値、論理ダイジェストを独立した Rust 実装と照合します。生成データのオフセットが u32 に収まることも、書き込み前に検証します。

永続マップの生成経路を監査し構文検証と結果取得を実行 計画しコンパイルプール検証を構造化

設計とコンパイルプール用ヘルパーを追加

確認したユニットプール範囲と返却構造を再整理

確認したプール境界とコンパイル上限

構築したASTヘルパー

lkjyolo MCPの連携を使用しました プール範囲プローブを準備した

追加の検証はまだ実行中です。現時点で失敗は記録されていません。階層化の草案では、単位データ・ページ群・manifest の合計長を確認してからオフセットを符号化する形にしました。次は、切れたページ長フィールド、切れた本体、余分な末尾バイト、オフセットの exact-fit/one-over を検証します。

lkjyolo MCPの連携を使用しました 準備してコンテンツルートの不一致を検証した

lkjyolo MCPの連携を使用しました 確認したエンコーダーの変更結果とバックエンド対応状況

lkjyolo MCPの連携を使用しました

lkjyolo MCPの連携を使用しました 確認済み成果物の妥当性と取引CLIフラグを調査

確認したアップサート結合と行マップ検証

作成した受け入れ基準と受け入れドライバー

ページ階層の検証ケースは、空・単一要素、接頭辞が異なる二組の分割境界、3 階層・11 ページの構成にしました。親の集計値を壊した場合も、チェックサムと物理ダイジェストを再計算し、参照先の子との不一致まで検査が到達することを確認します。

自己ホスティング制限と検証テストを更新・確認 確認したクォーターバインディングと単位マップのグループ化

準備リリースCLIを再ビルドしトランザクション割当を確認

lkjyolo MCPの連携を使用しました 確認し子ページ所有権とユニットプール失敗テストを追加

境界算術を文書化しソースプロファイルの網羅性を確認

確認したリポジトリ状態とリモートセッションを再開

lkjyolo MCPの連携を使用しました 容量テストヘルパーと未使用ユニットヘルパーを追加した

lkjyolo MCPの連携を使用しました 確認したリポジトリ状態と親セッション

自己ホスティング制限と検証テストを更新・確認 策定しマップビルダーの範囲を確認した

確認済みページフィクスチャに正確なサイズ検証を追加

追加検証では公開 CLI テスト 347 件が通過し、残っているのは長時間の自己再生成・全コンパイラ検証です。次の 800 単位の対照プログラムには、旧上限を超えた位置の未使用関数を壊すケースも加えました。C1・C2・C3 の各段階で、その不正な単位が検査対象になることを確かめます。

拡張可能な階層型ユニットマップを検証・実行し成果物を追跡 準備済みベースラインマニフェストとテスト一覧を更新

構築した受理基盤を起動

確認したマップテスト用フィクスチャとPageStoreページ

構築し検証したASTのlet束縛スコープチェッカー

拡張可能な階層型ユニットマップを検証・実行し成果物を追跡 テスト実行結果を待ちネイティブ末尾呼び出し上限を確認

再帰呼び出し深度と正規スキーマを確認しました

Canonical HEAD照合に向けたリモート識別情報確認を準備しました

バッチドライバー入力を準備した

ルートリースを準備しネイティブバックエンドテストを確認

準備と確認を行ったネイティブ固定小数点処理

ネイティブ容量測定を準備し固定小数点テストを実行

拡張可能な階層型ユニットマップを検証・実行し成果物を追跡 準備したパック数報告とビルダー失敗チェック追加

拡張可能な階層型ユニットマップを検証・実行し成果物を追跡 コンパイラと整形を確認し子記述子オフセットを計算

マップとページの容量を確認した

拡張可能な階層型ユニットマップを検証・実行し成果物を追跡 追加の check changed も 29 ゲート全て fresh・成功、再利用 0 で完了しました。既存の full acceptance と同じ候補ツリーであることを最終確認し、Target 選択変更を main に統合します。その後、準備した階層マップ変更を公開 tx で採用して検証します。

lkjyolo MCPの連携を使用しました Target 選択変更は 7d928f74ad1c47bc625cd55fd9675f61e3a21ceb として origin/main への統合を確認しました。受理済みツリーは dd549d04… のままです。ここから別の変更単位として階層マップを採用します。公開トランザクションは新規 9 関数・既存 4 関数の更新に絞り、変更のない関数は含めません。

lkjyolo MCPの連携を使用しました 待機してci::sizeの解決を確認した

借用引数の構文を確認した

設計ドラフトを検証し階層マップ適用状況を確認 準備済みフィルターテストの初回実行待ち

確認したRustの新規テストとソース記述子

ソースインデックスの呼び出し元を確認した

lkjyolo MCPの連携を使用しました 準備済みのテスト実行と正規化入力テスト

準備した入力スナップショット

設計ドラフトを検証し階層マップ適用状況を確認 階層マップ変更の公開 tx は受理され、差分検証は equal でした。正本は rev_66230e23… に進み、新規所有者 966 件・既存関数更新 4 件が記録されています。現在、独立オラクルとのページ比較、境界検査、800 単位の入出力、提案と正本の一致、ネイティブ固定点を順に実行しています。

lkjyolo MCPの連携を使用しました レビューした単位マップの書式

対象を絞ったレビューを準備した

作成しステージ済みフリーズガードを確認

準備しテスト数の前提を検証した

ネイティブアーティファクトサイズとベンチマーク測定値を確認した

試作したレシート記録と新規ゲート入力を検証した

検証用割り当てとバリデーション呼び出し連鎖を確認した

階層型ユニットマップ生成処理の変更と進捗を検証した 準備したu32最大値テストと対象テスト待機

数値制御フィクスチャを準備し行数テストを確認

確認し将来監査メモを準備

サブツリー深度とプール範囲の境界を確認した

アーティファクト診断とネイティブ呼び出し深度を確認した

末尾呼び出しのロワリングとネイティブ対応を確認した

確認し凍結証明を待機

ステージ済みツリーと型の数を確認した

階層型ユニットマップ生成処理の変更と進捗を検証した 階層マップの最初の検証が通過しました。VM・独立参照実行・ネイティブの出力が一致し、分割境界と 3 階層の全ページが Rust オラクルと一致しています。欠落した子ページと、再ハッシュ済みの不正な集計値・内容コミットメントも、意図した検証層で拒否されました。

検証結果と変更予算実装および階層ユニットマップ進捗を確認しました 修正した配分コメント

確認したアーティファクトルートのメタデータ

確認用入力を検証し正規成果物との一致を確認

確認済み低速テスト結果とネイティブクロージャ形式の正規化

確認しバイナリフィルター対応を移植

更新しましたプロフィール脚注

確認済みのターゲットテストとプロデューサー変更

確認済みアーティファクト出力の一致とマニフェスト範囲

更新したソースプロフィール入力と生成画像の範囲確認

受け入れテストドライバーとディレクトリを準備した

検証済みフリーズマニフェストと受領書を整理

検証したブートストラップパスとフェッチ履歴

検証結果と変更予算実装および階層ユニットマップ進捗を確認しました 生成データの境界検査と入力検証 7 件も通過しました。800 単位の成果物は厳密ローダーに受理され、未使用関数を含む全単位とソースオブジェクトが保持されています。現在は提案ファイルと正本の意味的一致を確認中で、その後に C2/C3 の固定点と最新の全在庫計測を行います。

実行した階層ユニットマップ受け入れ検証と自己ホスト関連コード確認 ネイティブ容量ハッシュと固定小数点ハッシュペアを比較確認した

プールサイズ境界とフォーマッタースロット増加を確認した

パックサイズとカーネル作業範囲を確認した

完全な検証を準備した

確認し関数数を調整し正規グラフテストを検証しました

確認したネイティブクロージャ選択

実行した階層ユニットマップ受け入れ検証と自己ホスト関連コード確認 確認済みソース上限範囲

確認したソース範囲と予算フローを追跡

約5千語を保存しルート状態を記録

確認した正規単位の整合性

比較用ネイティブフィルター出力を確認しテスト実行

自己ホストテスト件数を確認した

確認済みコンパイラ採用状況と保留リクエスト

確認しました

準備した受け入れ監査と出典抜粋

E2 Bytesステージ対応を実装

正規化しバイナリフィルター結合を検証しました

バイトテストを準備し標準型行を評価

計画を洗練し意味型を正規化

確認したダイジェスト表示対応

800 単位の対照入力は 10,917,427 バイト、生成成果物は 11,179,173 バイトで、単位マップは 249 ページでした。旧 700 単位上限と旧 8 MiB 上限の両方を超えています。これは今回の測定結果であり、残る u32 オフセットや値サイズの境界まで処理できるという主張には含めません。

検証ロジックと変更予算を調査し実行準備を整理 フルVMテストを実行しパリティテストを待機

実行済み正規性確認と呼び出しチェーンファイル読了

バリデーター呼び出し箇所とフルパスクォータを確認しました

検索でソースと予算の定義を確認

lkjyolo MCPの連携を使用しました 待機中の WS1 監査では、検証器の 1,000 万 work の clamp に加え、参照実行側が複数パッケージで同じ有限枠を共有していることを確認しました。ここを無制限既定にするには、式・affine・callable 検証への引き渡しと、厳密な残量計数を一緒に変更する必要があります。今回の階層マップ変更とは別の未解決事項として記録します。

継続チェックポイントと論理計画の変更予算配線を検証した ビルド状況を確認し受け入れスクリプトを検査した

確認用ハッシュとフォーカス済みハッシュを検証

コミットチェックと全テストゲートを確認した

コンパイラ識別情報を確認し新しいC1出力を検証した

ネイティブビルド出力を確認した

一時テスト成果物を確認しネイティブ進捗を待機した

確認待ち後にencode_budget形式を調査した

継続チェックポイントと論理計画の変更予算配線を検証した 本番ChangeBudgetフィールドとソースファイルを特定

確認した正準エンコーディング互換性と予算エンコーディング意味論

確認したゼロ操作の意味論と厳密なコスト上限

安定したジョブ状態を保持した

実装済み公開前検証コールバックと独立テスト結果を確認しました

完了したパリティチェック

待機してメトリクス凍結とベンチマーク同等性を確認

正本との一致試験は、維持中の全関数を再構成する工程を継続しています。候補のソースと正本ハッシュは固定されています。後続の受理手順は、同じ staged tree に対する bootstrap、自己ホスト検証、changed/full の各ゲート、release 検査まで準備済みです。

lkjyolo MCPの連携を使用しました 階層化 unit-map の重点試験では、700 units を超える成果物、複数階層のページ、厳密な長さ・要約検査が通っています。現在は全維持関数と正本の一致検査を続けています。候補を固定したまま残りの固定点・全在庫測定を完了し、その後に staged tree 全体の受理と統合へ進めます。

階層ユニットマップ実装と自己ホスト成果物を検証した

lkjyolo MCPの連携を使用しました テスト抜粋を確認し正規型の件数を確認した

階層ユニットマップ実装と自己ホスト成果物を検証した 長時間の一致検査は CPU を使って進行しており、失敗や入力変更は検出されていません。今回の容量変更は、Rust 側の入力生成から自己ホスト側のページ生成・全ページ梱包・厳格ローダーまでつながっています。残る u32 offset、個別オブジェクト、WS1 の作業量制限は、削除済みの 700-unit 制限と分けて記録します。

階層マップ取得と予算検証、提案整合性を確認 WS1の完全なセマンティクスを読了

lkjyolo MCPの連携を使用しました

lkjyolo MCPの連携を使用しました 修正したエクスポーターブランチの状態

全関数の正本一致自体は通りましたが、その後の mode-0 export が affine buffer の分岐合流で拒否しました。新しい容量エラー経路と既存 exporter の custody 表現の接続に問題があります。失敗の記録を保存し、所有権検査を弱めずに原因を特定して修正します。

自己ホスト入力処理とバッファ破棄実装を調査・検証しパッチ適用 廃棄サポートを確認した

lkjyolo MCPの連携を使用しました 作成した輸出業者向けメモ

確認したリカバリー生成器

準備した復旧対象コマンド

lkjyolo MCPの連携を使用しました 修正は、容量エラーを返す各経路で既存の core.buffer.discard を明示的に呼び、分岐合流前に buffer の custody を揃える形にします。この intrinsic は既に VM・独立 reference・native の受理済み試験で検証されています。buffer を不要にコピーする freeze は使わず、exporter の厳密な検査を保ちます。

階層ユニットマップを修正・結合し復旧状態を検証 準備継続実行環境

階層ユニットマップを修正・結合し復旧状態を検証 続行スクリプトを準備した

lkjyolo MCPの連携を使用しました 生成されたラッパーを確認した

階層ユニットマップを修正・結合し復旧状態を検証 監視を完了し計画を準備した

階層ユニットマップを修正・結合し復旧状態を検証 詳細にmode0の利用箇所を調査した

修正 transaction は differential equality を保って受理され、正本は rev_1c34f3f6… になりました。現在、この正本から native compiler の固定点を再確認しています。併せて、最大 u32 unit count が allowance 計算より前に layout 検査で拒否される回帰ケースを追加しました。

検証仕様とスクリプト、復旧ログ、公開成果物を確認しました 準備として公開スクリプトを作成

検証仕様とスクリプト、復旧ログ、公開成果物を確認しました 準備しました

検証仕様とスクリプト、復旧ログ、公開成果物を確認しました まとめた出版物関連成果物

lkjyolo MCPの連携を使用しました エラー経路の所有権処理を、成功経路と同じ厳密な状態に揃えました。変更したのは既存 intrinsic の明示的な利用で、言語の許可範囲や bytecode の検査規則は変えていません。固定点試験の再ビルド中に、最終受理と通常の main 統合を同じ tree・receipt に結び付ける手順も確認しました。

自己ホスト実行テストの変異処理と階層マップ復旧を確認 監視してネイティブ固定小数点コンパイルとリプレイを完了

確認済みソースグラフの許可

lkjyolo MCPの連携を使用しました Rustチェックの完了を待機

lkjyolo MCPの連携を使用しました 実行したプロジェクトの読み取り専用検査

lkjyolo MCPの連携を使用しました 修正後の compiler は mode-0 export を通過し、固定点試験の実行段階に入りました。次は C2/C3 の ELF 一致に加え、800-unit の成果物が各 native stage で一致すること、700 番以降の未使用 unit に入れた不正データを各 stage が拒否することを確認します。

アイデンティティ変更と階層復旧、検証進捗を確認しました 送信した最終レビュー報告書

ユニットマップ修正状態と回復手順の記録 準備して対象ネイティブチェックを実行しました

アイデンティティ変更と階層復旧、検証進捗を確認しました 完成了工件制作

アイデンティティ変更と階層復旧、検証進捗を確認しました 準備候補証拠と受入記録

アイデンティティ変更と階層復旧、検証進捗を確認しました C1成果物の完成を待機

C2/C3 の standalone ELF は一致しました。今回の backend closure は 254 functions・17,033 nodes、ELF は 2,676,552 bytes です。続く試験は、完全な compiler 成果物と独立した容量プログラムの比較、さらに compiler-source mutation の挙動確認を実行しています。これは Tier 1 の固定点であり、raw source からの Tier 2 完了とは区別します。

lkjyolo MCPの連携を使用しました 確認待ちの階層を確認し投影範囲の診断を確認

リテラル編集と修復検証、階層マップ復旧状況を確認しました OptionalAmountを実装しクォータ検証範囲を限定した

リテラル編集と修復検証、階層マップ復旧状況を確認しました 完全な成果物の比較は、未使用の関数・型も含む inventory 全体を処理しています。固定点の最初の一致だけでは終了せず、全 artifact の厳格な読み込みと独立プログラムの実行まで続けています。並行の読み取り監査では、次の WS1 変更に必要な repair・oracle・request commitment の接続箇所も確認できています。

準備し証拠に基づくステータスを推敲した

C1-C3比較を準備した

検証し関連カーネル進捗と復旧処理を監視した 下書きスクリプトを描画し三つの文書書き込みを保護

確認したゲート全体

検証し関連カーネル進捗と復旧処理を監視した テスト進捗を確認した

残り700件の参照を確認した

検証し関連カーネル進捗と復旧処理を監視した 現在の集計範囲を確認しプロトコル文書を統合

準備したスクリプト内容

検証し関連カーネル進捗と復旧処理を監視した テスト結果と正規所有権を確認した

すべての分岐をテストした

検証し関連カーネル進捗と復旧処理を監視した WS1 の監査では、kernel の 10M 制限に加え、package oracle の 16M 制限と associated-type admission の独立した作業量制限を確認しました。repair の残量計算や request/plan の identity binding まで接続して扱う必要があります。この監査結果を次の変更範囲として残し、現在の階層化候補への追加変更は止めて検証を続けています。

確認を待ちながら実装案を準備した

確認し完全なテスト結果を待機

確認用スレッド設定をレビューし容量を確認

lkjyolo MCPの連携を使用しました ステータス文書スクリプトと候補文書を準備した

準備したテーブルフィルターとドキュメントのテストモジュール

自己ホスト復旧成果物とドキュメント準備状況を検証 修正した下書きコマンドのアンカー

lkjyolo MCPの連携を使用しました 800-unit の容量 fixture は C1/C2/C3 すべてで同じ成果物になりました。入力は 10,917,427 bytes、出力は 11,179,173 bytes、unit-map は 249 pages です。完全な維持 compiler の .lkja も各 stage で一致しています。残りは mutation controls と全在庫・native 測定の完了、その後の frozen-tree 受理です。

自己ホストテストと階層ユニットマップ復旧を確認 確認済みソースの変更出力とクロージャー

確認済みレシート整理とリポジトリ状態

監視したテストの進捗

自己ホストテストと階層ユニットマップ復旧を確認 固定点試験は、compiler を公開 authoring 経路で再構成して mutation を検証する工程に入っています。プロセスは継続して CPU を使っており、入力ハッシュも固定されています。完了後すぐに文書と測定値を確定して stage できるよう、準備処理は用意済みです。

lkjyolo MCPの連携を使用しました Refined documentation details

lkjyolo MCPの連携を使用しました 作成した凍結ヘルパーと追跡ファイルを確認

ステージされたファイル一覧を確認した

監視スクリプトを解析し階層マップ復旧と整合性を検証 確認したステージ済みソース変更

監視スクリプトを解析し階層マップ復旧と整合性を検証 監視ログを確認しネイティブメモリ使用量を確認した

子ページの所有権を整理した

文書の確定処理は、全在庫と native 測定の revision・semantic state・carrier hash が一致し、重点試験がすべて終了した場合にだけ動くようにしてあります。現在は mutation 用 compiler の再構成が続いています。成功した部分と、まだ実行中の検証を分けて記録しています。

lkjyolo MCPの連携を使用しました ルートチェックポイントを準備した

階層マップ復旧を監視・検証しスカラー実装構造を調査 監査し未対応型フィクスチャを更新した

バイナリフィルターの種類を確認した

lkjyolo MCPの連携を使用しました 確認したソーススカラーのレコード構成と呼び出し経路

確認して捨て札の採用順序を解決しました

確認した破棄機能の対応範囲

次の source-driven 拡張では、Target の型検査だけでなく、型 inventory、式の推論、record の lowering、mode-0 の型表生成をまとめて更新する必要があることも確認しました。現在の packer は組み込み型の固定表を出しているため、Bytes/record の許可だけを先に広げる変更にはしません。現候補の検証と統合を先に完結させます。

lkjyolo MCPの連携を使用しました ネイティブVMを変更した

lkjyolo MCPの連携を使用しました 更新されたチェックポイントハッシュとRustテスト割り当てを確認しました

検証済みプール範囲とネイティブ変更を待機

mutation 再構成は継続中で、ここまで新たな失敗はありません。候補の code と正本は固定し、同じ Cargo lease の下で残りの検証を待っています。

lkjyolo MCPの連携を使用しました 変更パッケージを検証しネイティブクリーンアップを確認した

確認したバッファ寿命と末尾呼び出し適格性

確認しましたソースAPI権限と最小バイトフィルターを設計

確認したレコードのエンコーディングとレイアウト

スカラー末尾呼び出しと末尾コンテキストの下げ方を設計

監査した末尾呼び出しの前提条件

The hierarchical unit-map candidate remains fixed while its recovery checks finish. The native and artifact stages already reproduce byte-for-byte, including the independent 800-unit fixture; the source-mutation control is still running before I can mark the targeted suite complete.

lkjyolo MCPの連携を使用しました リリース状況を確認した

階層ユニットマップを復旧し検証・受け入れ状況を確認 準備されたスライス監査

The mutation control has progressed to a compiler binary with a different hash, confirming that the source change reaches generated code. I’m also reviewing the next dependency: scalar tail-call lowering can establish bounded-frame execution before Bytes and records add ownership and layout obligations.

lkjyolo MCPの連携を使用しました

ドキュメント準備スクリプトの解析 The native audit found a coupled limitation: both emitters reuse frames only for direct self calls. Mutual tail calls still emit a call followed by an epilogue. The next stack-safety slice must address that transfer mechanism, or explicitly limit its claim to self recursion.

lkjyolo MCPの連携を使用しました The review confirms that the new hierarchy preserves the existing canonical map encoding. Larger maps add branch and child pages, and every page enters the artifact inventory. I’m keeping the measured work counters, physical pack growth, and unresolved native memory reclamation separate in the acceptance record.

測定テストコードの評価 ユニットマップを読み取った

確認済み階層ユニットマップの公開・復元処理とテスト結果

階層マップ復旧結果の取得 確認したプロファイルファイルと引き継ぎ文面を準備

The hierarchy’s recursion has a separate, finite bound: each branch consumes another byte of a 17-byte key, while page aggregation uses tail-recursive loops. The wider native tail-transfer limitation remains follow-up work. The recovery test is still processing the compiler-mutation artifact, with no new failure reported.

更新文書を反映し階層マップを復旧して結果を取得 確認された容量境界テスト

lkjyolo MCPの連携を使用しました The complete native fixed-point test has passed, including the compiler-source mutation and changed-behavior controls. It took 2,110.076 seconds. The recovery runner has moved on to the extent/admission checks and fresh whole-inventory measurements.

確認して自己ホスト入力差分と階層マップ復旧を検証 確認した対象テスト数

確認して自己ホスト入力差分と階層マップ復旧を検証 調査した割り当て処理の経路

確認して自己ホスト入力差分と階層マップ復旧を検証 The diff review confirms that both the Rust projector and the profile-5 reader have lost the 700-unit guard. The replacement still checks directory extents before allocation, and generated pool offsets remain checked against their encoding range. The candidate has no whitespace errors.

lkjyolo MCPの連携を使用しました The extent checks, all seven artifact-input tests, and the fresh inventory profile have passed. The current compiler has 72 modules, 593 callables, 34,550 live owners, and 40 supplied types. Its complete source carrier is 8,422,624 bytes, now beyond the former 8 MiB aggregate boundary. Only the maintained native measurement remains in this recovery run.

評価した単位マップ変更差分と階層マップ復旧結果 推定し分岐数とページプールの範囲を精緻化

lkjyolo MCPの連携を使用しました All five recovery commands have completed successfully. The maintained compiler now has 597 canonical units; native C2/C3 and the .lkja outputs from C1/C2/C3 match exactly. I’m recording those results, reviewing the final diff, and freezing the staged tree for publication acceptance.

lkjyolo MCPの連携を使用しました 確認したフォーマットとテスト

階層マップと自己ホスト成果物を検証し文書化 修正してドキュメントの書式を整えた

lkjyolo MCPの連携を使用しました The final review is complete. The candidate includes the hierarchy, all child-page inventory and pack handling, checked generated-pool extents, independent boundary and corruption controls, and the adopted canonical compiler revision. I’m staging these paths and starting the exact-tree acceptance sequence.

lkjyolo MCPの連携を使用しました 作成したブートストラップ親ディレクトリ

Bootstrap stopped while creating its evidence directory because the parent path was absent. I’m preserving that failed-start log, creating the parent directory, and rerunning acceptance for the same frozen tree, 32ff68b548b2fcb5aecd8c01229b8a7c757490d5.

lkjyolo MCPの連携を使用しました ブートストラップの進捗を確認した

lkjyolo MCPの連携を使用しました 祖先を辿って末尾所有者を特定した

ブートストラップ復旧と階層マップ・監査実装を検証記録化 Bootstrap has passed for the frozen tree. The literal self-host verification is now building and running under the coordinated target lease. The source tree and index will remain fixed through the focused tests, changed check, 29 fresh full gates, and release check.

準備する情報源の事実を整理した

自己ホスティング実装と参照実装を検証・監査した 参照末尾評価器を調査した

lkjyolo MCPの連携を使用しました The follow-up audit found a smaller path for self-tail lowering: mode-0 validation already checks every instruction, including unreachable continuations, and checks tail-call argument depth, result type, and released custody. That may allow the existing layout to stay intact while eligible self calls emit frame-reusing transfers. This is still a design finding.

末尾再帰最適化とブートストラップ自己ホスト検証を監査しました コンパイラの進捗を確認しフェーズ監視機能を構築

待機してフェーズ変更を確認した

末尾再帰最適化とブートストラップ自己ホスト検証を監査しました The release test binary has built, and the focused run has started all 130 self-host tests: 128 expected passes and two explicitly ignored measurements. The initial projection and representation-boundary checks have passed. The separate native suite follows.

lkjyolo MCPの連携を使用しました 監査したジェネリック型記述子

外部シグネチャと制御フローを抽出し再帰末尾位置を監査した 実施した情報源監査を記録

外部シグネチャと制御フローを抽出し再帰末尾位置を監査した The focused run is progressing through native arithmetic, trap, and differential controls, with no failure reported so far. The fresh inventory also confirms that 169 of 172 recursive components are self-recursive; the three mutual components are map-hashing and map-emission pairs. This supports prioritizing direct self-tail lowering, while preserving separate proofs for those bounded map recursions.

再帰境界と5つの非末尾呼び出しを確認した

調査対象の件数と範囲を確認した

非末尾再帰フローを監査し階層マップ受け入れ結果を確認しました 3つの証明を確認した

非末尾再帰フローを監査し階層マップ受け入れ結果を確認しました 待機して検査結果を確認

lkjyolo MCPの連携を使用しました テスト用ミュータントで決定性とトランザクション検査アクセスを確認した

レビューと設計を行った末尾呼び出しテスト

準備したスタック制限付きハーネス

The focused run has reached compiler determinism and source-mutation controls. For the next slice, I’ve narrowed the non-tail self-recursion audit to two merge-sort functions and the fixed-width integer encoder. Those need their own depth arguments; a tail-call annotation would not cover them.

監査し式置換実装と階層マップ受け入れ結果を確認 セルフホスト呼び出し回数を確認しネイティブループテストを規模設計

計画し式パッチAPIを確認した

置換パターンを特定しイベントラッパーを設計

監査し式置換実装と階層マップ受け入れ結果を確認 公開オーナーパッチを確認しドキュメント要件を点検

確認したリモートoriginとWorkBudgetカウンター

実行済みのネイティブ再生テストを確認しました

lkjyolo MCPの連携を使用しました The focused run remains active in the mutation/reconstruction controls. CPU time is increasing and the process is healthy; it has not reported a failure. I’m letting the prescribed run finish with the candidate held fixed.

受諾判断を待機

一時アーティファクトのクリーンアップ範囲を確認した

評価して所有者数を照合した staged artifact クリーンアップ

意味グラフと正規型マッピングを確認した

導出してランタイム割り当て領域を定義した

設計しトラップのライフサイクルを確認した

lkjyolo MCPの連携を使用しました The mutation controls are still running. The WS1 audit has also narrowed the next quota boundary: optional work limits must pass coherently through kernel validation, repair, witnesses, oracle validation, and associated preparation. The oracle still explicitly supplies a finite limit, so changing the kernel default alone would leave an active ceiling in that path.

監査報告書を追加し階層マップの受け入れと監視を実行 確認し、検証範囲を草案化した

ホスト統合を検証した

lkjyolo MCPの連携を使用しました The focused run has advanced: malformed-input rejection and complete-function-body rejection controls have passed. Those checks remain active alongside the larger-capacity fixtures. The source tree is still frozen for the remaining acceptance phases.

保存した監査を基に提案の同等性を確認しました

導出してネイティブコンパイル段階を分類した

評価し、カーネル予算変更と許容量の意味を定義した

監査したアンメーター作業伝播とSCC進捗チェック

The capacity and storage measurements are recorded separately. The hierarchy candidate adds 544 live owners and 603 retirements, while physical packs grow from 430,408,188 to 451,334,442 bytes. These adoption costs remain visible; the change does not claim storage compaction or identity-churn reduction.

lkjyolo MCPの連携を使用しました 並列パリティテストを実行しアイデンティティのオーバーヘッドを評価した

リポジトリのリセット動作とソースリビジョンを確認した

評価し在庫クエリを改訂した

定義済み表現アンカーと置換操作

確認済み準備計画とパッチスキーマの同一性

lkjyolo MCPの連携を使用しました 確認済みネイティブバックエンドログと固定小数点タイミングデータを比較

確認したソース要求と容量の上限

凍結マニフェストとセレクター完全性を確認した

モニターログ処理を確認した

The focused run is now replaying the maintained proposals against the authoritative compiler graph. This is the check that exposed the earlier custody mismatch, so I’m waiting for its terminal result before treating proposal parity as restored in the frozen acceptance run.

完了したパリティリプレイを監視しました

lkjyolo MCPの連携を使用しました The complete native backend reproduction test has now passed in the frozen acceptance run, including mutated-compiler artifact equality and changed behavior. Its hashes match the targeted measurements. Proposal parity and the remaining source-admission controls are still running.

確認したバッファ契約と破棄診断

確認して正規マップの出力とバイト列を比較しました

確認した範囲境界とカーソル境界テスト

接頭辞マップとネイティブ関数容量をテストした

lkjyolo MCPの連携を使用しました 検証ゲートを待機しツリーの静止状態を監視

The current compiler’s normalized byte inventory has passed admission, and rehashed noncanonical history-record controls have passed. The suite is moving through source-carrier validation while proposal parity continues.

確認済みソースオブジェクトの不一致

ソースオブジェクト数とメタデータ容量を確認した

拡張ユニット容量をテストした

lkjyolo MCPの連携を使用しました Two long checks are active: proposal reconstruction and source-map commitment validation against the current canonical state. The test process remains CPU-active. The native reproduction block has passed; the focused suite has not yet reached its final result.

プロファイルと所有バッファのコストをモデル化

モジュール rename API とネイティブスカラー経路を確認しました

検証したByteBufferのライフタイム

lkjyolo MCPの連携を使用しました 繰り返し確認を準備した

監視ループとステータス監視を設定した

5回および6回の監視サイクルを準備

Proposal parity and source-map validation are still running without a reported failure. I’m continuing timed monitoring; the commit and push remain gated on the full terminal receipts.

lkjyolo MCPの連携を使用しました I’m checking the active acceptance run and its frozen-tree receipts. Integration remains gated on the completed verification results.

lkjyolo MCPの連携を使用しました 確認用ソース文書の受け入れ状況を確認

The frozen tree still matches the staged candidate. Whole-source map validation has passed for 34,550 live owners and 12,612 retirement records. The focused suite is continuing; no failure has been reported.

lkjyolo MCPの連携を使用しました 確認ゲートを読み取りました

lkjyolo MCPの連携を使用しました

lkjyolo MCPの連携を使用しました 確認済みの凍結ゲート

The source-object binding controls have passed, including rejection of incorrect keys, kinds, hashes, and lengths. The hierarchy’s native fixed points also passed earlier in this run. I’m keeping the candidate unchanged through the remaining checks.

lkjyolo MCPの連携を使用しました

lkjyolo MCPの連携を使用しました Maintained-proposal replay has passed: all 597 canonical units and the native backend closure match the authoritative project. That closes the parity check for the new map and artifact code. The remaining focused admission tests are still running.

確認済みの意思決定ファイルをレビューした

lkjyolo MCPの連携を使用しました The semantic-state check has matched the current canonical revision, including all owner and retirement maps. The focused log has no failures so far. I’m also preparing the quota-accounting design for the next slice while this acceptance run finishes.

lkjyolo MCPの連携を使用しました The focused suite is now exercising source effect and nominal admission, including all twelve namespace classes. The compiler fixed-point and canonical-project parity checks are already green; the repository-wide gates follow this suite.

ゲート台帳を特定し監視を開始

階層マップ受け入れテスト結果を取得し監視実行を確認

lkjyolo MCPの連携を使用しました Effect-constraint and namespace-separation controls have passed. The next quota slice now has a concrete design: one exact remaining-work ledger shared across nested validation passes, with saturated telemetry kept separate. That design will wait until this candidate is integrated.

現在のブートストラップIDを読み取った

lkjyolo MCPの連携を使用しました プロフィール定義を読み込んだ

監査しレシート情報とレジストリプロファイルを確認した The bootstrap receipt binds the verifier to the exact staged tree, and the registry still defines 29 full gates. At final review I’ll check their names, input digests, and verifier identity as well as the pass count.

lkjyolo MCPの連携を使用しました The effect-owner checks now pass for incompatible and missing endpoints. The focused run is still healthy and progressing through the source-admission controls; the candidate remains unchanged.

監視中の定期チェックを確認した

lkjyolo MCPの連携を使用しました Package/member identity binding and the unused-descriptor effect-scope controls have passed. The suite is moving into type-structure admission.

lkjyolo MCPの連携を使用しました The native type-structure reader has been produced successfully, and type-scope controls are running. Acceptance is still in the focused stage; the 29-gate repository run has not started yet.

lkjyolo MCPの連携を使用しました The type-scope workload is still running, with no new failure or terminal result. I’m continuing to monitor the same acceptance run.

lkjyolo MCPの連携を使用しました The latest controls passed for shared descriptors in both context orders, new operation/result type roots, untaken branches, and type parameters in task signatures. These checks preserve admission coverage beyond the selected executable path.

lkjyolo MCPの連携を使用しました Foreign binders with matching names are correctly rejected, and the explicit unsupported-effect boundary still holds. The focused suite is now checking its budget and termination controls.

lkjyolo MCPの連携を使用しました The current tests are checking exact composed-work limits and depth enforcement on unused type edges. Those safeguards remain in place; this slice removes the aggregate single-page map ceiling.

lkjyolo MCPの連携を使用しました Unused task-row endpoint checks and canonical effect-shape checks have passed. The independent kernel also accepted the pure-function binder fixture, preserving a separate oracle for the source checks.

lkjyolo MCPの連携を使用しました The focused suite is still running. There is no new failure or completed phase to report.

lkjyolo MCPの連携を使用しました The suite has reached complete raw-source graph admission for the maintained compiler and independent programs. This exercises the current 8,422,624-byte carrier against the source validators.

lkjyolo MCPの連携を使用しました The complete-carrier graph test is still running, with no reported failure. I’m keeping the same process and frozen inputs through this control.

lkjyolo MCPの連携を使用しました The focused log currently records 72 passes and no failures. For context, this same stage took about 91 minutes on the accepted selector baseline; the current run is about 63 minutes in and is still using CPU normally.

lkjyolo MCPの連携を使用しました The complete-graph control remains active and continues consuming CPU. No failure has been reported.

lkjyolo MCPの連携を使用しました The native source-graph capacity control passed above the former byte limit. Its freshly rebound missing-type fixture also reached the intended validator and was rejected with diagnostic 14.

lkjyolo MCPの連携を使用しました The graph traversal checks passed for the final operand of the final supplied owner and for valid unused type inventory. The suite is now moving through source-index controls.

lkjyolo MCPの連携を使用しました The run is now exercising namespace-key projection and readers. The suite’s measurement-only exclusions remain separate from the targeted profile and native-closure measurements already completed for this candidate.

lkjyolo MCPの連携を使用しました Namespace controls passed for parent classes, local shadowing, and all eight decoded collision classes. The namespace work-budget controls are running next.

lkjyolo MCPの連携を使用しました The namespace allowance boundary passed exactly at 619 measured work units. Explicit finite quotas continue to enforce their configured boundary.

lkjyolo MCPの連携を使用しました The focused process remains active, with no new failure or phase completion. I’m continuing the scheduled acceptance checks.

lkjyolo MCPの連携を使用しました Nominal-flow admission is now running against the complete compiler inventory and finite-schema fixtures. This is part of the preserved recursion and generic-flow soundness coverage.

lkjyolo MCPの連携を使用しました The nominal-flow VM phase completed after roughly 985 million instructions. Its allocation counter is cumulative modeled allocation; it does not measure resident memory. The remaining oracle checks are still running.

lkjyolo MCPの連携を使用しました The nominal-flow controls are still running with normal CPU activity. No failure has been reported.

lkjyolo MCPの連携を使用しました Depth enforcement on unused input/result type edges has passed. Nominal checks also passed for signatures, phantom parameters, and inactive members.

lkjyolo MCPの連携を使用しました The nominal-flow resource-refusal control is now running. It checks that an explicitly selected finite policy still produces the resource diagnostic at its boundary.

lkjyolo MCPの連携を使用しました The nominal-flow resource boundary passed at 2,579 work units. The focused suite continues with no reported failures.

lkjyolo MCPの連携を使用しました 実行順序付きテストを実施した

The nominal controls passed for expanding self/mutual recursion rejection, exact ordered argument arity, and the distinction between raw and live type inventories. Parent-namespace checks are next.

lkjyolo MCPの連携を使用しました The suite has reached scalar source compilation and explicit-target selection. It is rechecking invalid unused functions under the selected target, so selection still cannot bypass supplied-source admission.

lkjyolo MCPの連携を使用しました Scalar negative controls are continuing, including an unused empty task that must still remain distinct from a pure function. The run has reported no failure.

lkjyolo MCPの連携を使用しました The scalar intrinsic controls are now running, including overflow cases. This revalidates the earlier intrinsic slice together with the hierarchy change.

lkjyolo MCPの連携を使用しました Intrinsic evaluation-order controls are progressing, including left-before-right operand evaluation. The focused run remains active without a reported failure.

lkjyolo MCPの連携を使用しました The negative intrinsic fixtures are still rejecting unsupported parameter modes even when the declaration is unused. Whole-inventory admission remains part of the selected-target checks.

テスト結果と長時間実行状況を集計した The focused log is now at 100 passes, zero failures, and the two expected measurement-only exclusions. The complete nominal-flow and scalar cross-engine controls are the current long-running tests.

lkjyolo MCPの連携を使用しました Explicit-target request controls are progressing, including retired-target rejection at diagnostic 19. They are bound to the current compiler carrier hash and deterministic request envelope.

lkjyolo MCPの連携を使用しました The source-to-ELF control passed for a hash-consistent carrier with a missing expression endpoint: it reached diagnostic 14 and emitted no image.

lkjyolo MCPの連携を使用しました The suite is now checking complete-compiler scope admission alongside nominal and recursive source fixtures. The staged candidate is still unchanged.

lkjyolo MCPの連携を使用しました The complete-source scope VM phase has completed. Its independent oracle checks are continuing; there is no reported failure.

lkjyolo MCPの連携を使用しました The source-scope and nominal cross-engine controls remain active. CPU time is advancing normally, and the log has no new failure.

lkjyolo MCPの連携を使用しました The same two long controls are still running. No acceptance phase has failed or required a restart.

lkjyolo MCPの連携を使用しました 検証予算の既定値を確認しセルフテール低下を計画

The current run remains healthy, with CPU time advancing and no test failure reported. I’m waiting for the complete-source oracle checks to finish.

lkjyolo MCPの連携を使用しました The complete-source controls are still running. The next acceptance step remains the changed-file gate run, followed by all 29 fresh full gates.

lkjyolo MCPの連携を使用しました The oracle checks remain active and CPU time continues to advance. I’m preserving the frozen candidate while they complete.

lkjyolo MCPの連携を使用しました The focused stage is approaching the duration of the previous accepted run. The remaining checks are still active, with no reported failure.

lkjyolo MCPの連携を使用しました There is no new terminal result yet. Both long-running controls continue using CPU, and the same acceptance run remains in progress.

lkjyolo MCPの連携を使用しました 確認した単位マップの終了条件とバックエンドテスト実行時間を見積もった

The focused suite is still in its complete-source oracle checks. The log remains failure-free; I’m continuing to wait for their terminal results.

lkjyolo MCPの連携を使用しました Complete-compiler nominal-flow admission has passed, including a compiler-source mutation rejected at diagnostic 16. The independent source-scope reference phase has also finished.

lkjyolo MCPの連携を使用しました Scope controls passed for orphaned, shared, and disconnected cyclic syntax; self/forward/foreign/escaped locals; and exact work refusal. The focused suite is progressing through its remaining checks.

lkjyolo MCPの連携を使用しました Decoding all authoritative records and independent-program fixtures has passed. This verifies the carrier’s record representation; source-driven semantic lowering of the broader type families remains a separate dependency.

lkjyolo MCPの連携を使用しました Canonical integer decoding is now being checked across all three engines, alongside owner-header and expression-canonicality rejection controls.

lkjyolo MCPの連携を使用しました Both checks passed: canonical integer decoding agrees across the three engines, and mismatched owner headers or noncanonical expressions are rejected.

lkjyolo MCPの連携を使用しました Type-scope checks passed for generic uses, parameters/results, lexical annotations, every supported expression type root, and resource/unsupported boundaries. The structural type-DAG depth boundary also passed exactly.

lkjyolo MCPの連携を使用しました The focused stage has passed: 128 self-host tests passed, 2 were intentionally ignored, and all 10 native checks passed. The driver has advanced to check changed; the 29 fresh full gates and release-target check still remain.

lkjyolo MCPの連携を使用しました 確認したDAG概要とゲート進捗

準備されたモニター実行

検証成果物とリポジトリ状態を確認し階層ユニットマップを監視 The changed-file run has completed Clippy successfully and is building the release targets. The post-focused check still shows the exact staged tree and base commit.

lkjyolo MCPの連携を使用しました Release compilation is still active. Clippy has completed, and the changed-file gate driver has not reported a failure.

lkjyolo MCPの連携を使用しました 準備した変更監視器

The release build is continuing through optimized compilation. The acceptance driver is still on the same frozen candidate.

lkjyolo MCPの連携を使用しました The release build passed. The changed-file run has advanced to the release command lifecycle test.

lkjyolo MCPの連携を使用しました 変更されたワークスペースゲートを確認しました

The copied-binary command lifecycle test passed. The changed-file gate driver is continuing through the remaining repository checks.

lkjyolo MCPの連携を使用しました ワークスペースのテスト進捗と実行状況を確認した

Service acceptance has passed. The changed-file run selected the full 29-gate dependency set; I’m checking its live progress while the remaining gates execute.

確認したプロセスと一時ログ状況 保存済みモニターコマンドを更新・準備した

The workspace test binaries are running alongside package and application checks. Their child processes are active; service acceptance and the command lifecycle test have already passed.

lkjyolo MCPの連携を使用しました The standard package passed all 116 tests with production/reference equality, and its artifact build succeeded. Outbound HTTP application acceptance has also passed.

lkjyolo MCPの連携を使用しました The workspace and public-CLI test binaries are still running, with active child processes. The changed-file driver has not reported a failure.

lkjyolo MCPの連携を使用しました Offline package acceptance has passed freshly. The workspace test binaries are still running.

lkjyolo MCPの連携を使用しました The remaining workspace tests are still active. No new gate failure has appeared.

lkjyolo MCPの連携を使用しました 自ホストテストを実行し容量上限を確認した

The changed-file run is still working through the workspace suite. The completed package and application checks remain successful, and the test processes continue making progress.

lkjyolo MCPの連携を使用しました The workspace test binaries remain active. There is no new terminal gate result or reported failure yet.

lkjyolo MCPの連携を使用しました ライブラリのテストを実行した

The workspace suite continues against the newly built release binaries. Both test processes are still advancing, with no reported failure.

lkjyolo MCPの連携を使用しました 監視進捗を確認しゲートセットの整合性を検証

比較しセッション完了を待機

The changed-file run is still in the workspace suite. No failure has surfaced; the final receipt will determine the completed gate count and input stability.

lkjyolo MCPの連携を使用しました 監視して多層テストを確認した

葉容量と乗算の上限を検証した

The remaining workspace tests are still executing normally. I’m continuing to the terminal changed-file receipt, then the mandatory fresh full run.

lkjyolo MCPの連携を使用しました The workspace suite is still active, with substantial CPU work in the library tests. No failure has been reported by the gate driver.

lkjyolo MCPの連携を使用しました Native compiler subprocesses are now active within the workspace suite. The changed-file run continues on the same candidate.

lkjyolo MCPの連携を使用しました 容量統合を継続しセレクターと階層テーブルを検証した

確認し、Tier 1の範囲を明確化

階層マップ受け入れテストを実行し進捗と結果を確認 無効な単位入場とページ境界適合性を確認しました

lkjyolo MCPの連携を使用しました The remaining workspace tests are still running. Their CPU time continues to advance, and no gate failure has been reported.

lkjyolo MCPの連携を使用しました The changed-file run remains in the workspace tests. I’m checking their duration against the previous accepted receipts while preserving this run and its evidence.

受け入れテストの実行時間を分析した 相変化監視を準備して10回実行した

The previous accepted workspace gate took about 38 minutes. The current workspace tests have been running about 18 minutes, with normal CPU progress and no reported failure.

lkjyolo MCPの連携を使用しました The workspace gate remains active. The candidate and verification process are unchanged, with no new failure reported.

lkjyolo MCPの連携を使用しました 実行最終検証とバッファ所有権確認を完了

ゼロの意味を確認しアーティファクト入力をテストした

The library and public-CLI test processes continue to advance. The changed-file gate is still waiting on their final results.

lkjyolo MCPの連携を使用しました The workspace gate is still running, with no reported failure. I’m maintaining the same acceptance run until it produces its receipt.

lkjyolo MCPの連携を使用しました 監視したワークスペースのテスト出力

The remaining tests continue to consume CPU normally. No new gate failure or completed phase has appeared.

lkjyolo MCPの連携を使用しました 実行結果を検証した

検証しバイトコードサイズを測定した

The workspace gate is still running. I’m continuing to its terminal receipt before drawing conclusions about the changed-file gate set.

lkjyolo MCPの連携を使用しました The workspace tests remain active, with no reported gate failure. The fresh full run is still the next required phase.

lkjyolo MCPの連携を使用しました CLI全体テストを確認しコミット時刻を待機

The changed-file run is still waiting for the workspace suite to finish. CPU progress remains normal, and no terminal failure has been reported.

lkjyolo MCPの連携を使用しました レビューリリースのターゲットメタデータを確認した

lkjyolo MCPの連携を使用しました The workspace suite is still running native compiler controls. The changed-file run has no reported failure and remains on the frozen tree.

lkjyolo MCPの連携を使用しました 出版受領とデータセット紐付けを確認した

ソース種別の受け入れとソート深度を確認した

監査して自己末尾呼び出しの安全な低下とIDリセット形式を規定

lkjyolo MCPの連携を使用しました The changed-file workspace gate is still running. Its test processes remain active, and no failure has been reported.

lkjyolo MCPの連携を使用しました The public-CLI test process has finished. The workspace driver is still running the library and checker test binaries; I’ll confirm their combined result from the receipt.

検証モニタリングとプロセス状況を確認した Workspace verification is still in progress. The combined terminal result has not arrived yet.

The changed-file gate run has passed, and the driver has advanced to check full --fresh --machine --jobs 4. I’m reviewing the changed-file receipt while the full run continues.

lkjyolo MCPの連携を使用しました The changed-file receipt is verified: all 29 gates passed freshly, with zero reuse and stable inputs. Its gate names match the current registry, and the staged tree is still 32ff68b548b2fcb5aecd8c01229b8a7c757490d5. The separate mandatory full run is underway.

レビュー結果を維持しユニットプール範囲を確認した

待機し凍結候補ガードを実行

Main origin/main still points to the accepted base 7d928f74ad1c47bc625cd55fd9675f61e3a21ceb. The full run continues; publication will follow the completed full and release-target checks.

lkjyolo MCPの連携を使用しました The full run has freshly passed offline package acceptance. Its workspace and public-CLI test binaries are active.

lkjyolo MCPの連携を使用しました 確認してstatus.mdの文言を更新した

確認受領書の受理

The fresh full run remains in the workspace suite. Both test processes are advancing, with no reported failure.

lkjyolo MCPの連携を使用しました The full workspace gate is still running. No new terminal result or gate failure has appeared.

lkjyolo MCPの連携を使用しました The fresh full run is continuing normally through the workspace tests. The earlier changed-file receipt remains fully passed with stable inputs.

lkjyolo MCPの連携を使用しました 監視中の読み取りとミュータント出力を確認しました

セレクター検証とモード1単位マップ容量を確認

lkjyolo MCPの連携を使用しました 地図ページの一意性とソースオブジェクト数を比較確認した

階層マップ受け入れテストを監視し完了を確認 The full workspace tests remain active. No gate failure has been reported, and the acceptance driver has not changed phase.

lkjyolo MCPの連携を使用しました The fresh full run is still executing the workspace suite. CPU progress is normal; there is no new terminal result.

lkjyolo MCPの連携を使用しました The full workspace gate remains active, with no reported failure. I’m continuing to its final receipt.

lkjyolo MCPの連携を使用しました 確認し読み取ったリリースベースライン

受け入れ済みベースラインを確定しチェックポイントを更新

Native compiler controls are active within the fresh full workspace run. The release-target check will follow once all 29 full gates have completed.

確認したリリースレシートの構造 確認した末尾呼び出し最適化とネイティブ自己末尾テスト

末尾呼び出し適格性とフロー検証の凍結を確認

確認しセレクター数の変化と成果物サイズを推定

The full run continues through the workspace tests. I also confirmed that release target records a policy check; I’ll report that separately from Git integration.

lkjyolo MCPの連携を使用しました The fresh full workspace gate is still running. Its test processes remain active, with no reported failure.

lkjyolo MCPの連携を使用しました The workspace tests continue to advance. The full-run receipt and release-target result are still pending.

lkjyolo MCPの連携を使用しました Native compiler subprocesses are active in the full workspace suite. No gate failure has been reported.

lkjyolo MCPの連携を使用しました The fresh full run is still executing its workspace gate. The test processes are progressing normally.

lkjyolo MCPの連携を使用しました スクリプトのダイジェストを検証した

ドキュメントのパスを確認した

確認されたunitmap入力検証

lkjyolo MCPの連携を使用しました The full workspace gate remains active. No terminal failure has been reported; I’m continuing toward the final acceptance and publication checks.

lkjyolo MCPの連携を使用しました The workspace tests are still advancing. The full-run receipt and final release-target check remain outstanding.

lkjyolo MCPの連携を使用しました The fresh full workspace gate is still active, with no reported failure. I’m keeping the candidate unchanged through its final result.

lkjyolo MCPの連携を使用しました The library and public-CLI tests continue to make CPU progress. No new gate result or failure has appeared.

lkjyolo MCPの連携を使用しました 検証済み意思決定文書とタイププロファイル

証明予算の制限を確認しカーネル作業ヘルパーを準備

mode0入力レイアウトを再設計しソース配線解析を実装

The final scope review confirms that the hierarchy results should be reported as Tier 1 normalized-input fixed points. Complete raw-source Tier 2 self-compilation and native phase reclamation remain open. I’m continuing the full-run verification.

lkjyolo MCPの連携を使用しました The full workspace gate is still running native compiler controls. No failure has been reported.

lkjyolo MCPの連携を使用しました The fresh full run remains active in the workspace tests. The candidate is still awaiting the terminal full-run and release-target results.

lkjyolo MCPの連携を使用しました The workspace tests continue to advance with normal CPU activity. No terminal failure has appeared.

lkjyolo MCPの連携を使用しました The full workspace gate is still running. I’m continuing to the complete receipt before integration.

lkjyolo MCPの連携を使用しました The public-CLI process has finished in the full run. The library test binary remains active; the combined workspace result is still pending.

lkjyolo MCPの連携を使用しました The remaining library tests are still making progress. The full-run receipt has not been finalized yet.

lkjyolo MCPの連携を使用しました The library tests remain active, with no reported failure. I’m continuing the same full acceptance run.

lkjyolo MCPの連携を使用しました 実行した全テストとヘルパーカバレッジを記録

The full run is still waiting on the remaining library tests. Their CPU time continues to advance, and no failure has been reported.

lkjyolo MCPの連携を使用しました The library gate remains active. I’m waiting for the complete full-run receipt and the final release-target result before publishing.

lkjyolo MCPの連携を使用しました 確認済みのソースツリーと準備済みルート

lkjyolo MCPの連携を使用しました The remaining library tests are still active. The full run is approaching the duration of the completed changed-file workspace gate, with no reported failure.

lkjyolo MCPの連携を使用しました The full workspace gate is still completing its library tests. I’m waiting for the terminal receipt before the publication review.

lkjyolo MCPの連携を使用しました The final library test process remains active, with no reported failure. The acceptance driver is still on the fresh full run.

lkjyolo MCPの連携を使用しました The full run is still waiting for the last library test result. I’m continuing through the final receipt and release-target check.

lkjyolo MCPの連携を使用しました 確認用領収書をレビューした

The acceptance driver has finished successfully. All 29 fresh full gates and the release-target check passed, and the final tree checks passed. I’m reviewing the terminal receipts and their identities, then I’ll commit and push the accepted tree.

実行した階層ユニットマップ受け入れ検証 Terminal review passed: both gate receipts contain the exact 29 registered gates, stable and matching source-input digests, and the same verified harness. The accepted tree is unchanged. I’m committing it and fast-forwarding main through the normal push route.

lkjyolo MCPの連携を使用しました 再評価された受け入れ済みベースライン

The hierarchy change is committed and pushed: 47e33ae90ec77b176597e45d7917694749526aba. The publisher confirmed that origin/main contains the exact accepted tree. I’m checking the final repository state and recording the remaining dependencies.

lkjyolo MCPの連携を使用しました 準備と完了のチェックポイントを追加しました

評価済み統合スライス

確認済みByteBuffer消費状況

独立したコントロールを確認した

確認した残りの上限

ソースの最小化と自己末尾コンテキストの絞り込みを準備

準備済みソースレベル自己末尾呼び出し低減

Post-push checks confirm a clean main, matching origin/main, and the exact accepted tree. The hierarchy slice is fully integrated. The remaining roadmap starts with source-level self-tail lowering and the Bytes/record binary-filter path; the broader WS1 work is still a separate audited dependency.

lkjyolo MCPの連携を使用しました 検証済みレシートハッシュと統合スライスを確認

フレーム境界とゼロ燃料マッピングを確認した

検証済みコンパイル成果物

確認した測定範囲と変更予算の上限下限

監査したソースの身元

決定論的フィクスチャハッシュと燃料上限計算を確認した

完了した検証レビューを締めくくった

固定点ダイジェストを提示した

Integrated outcome Two verified slices are now integrated into origin/main:

Commit Implemented change 7d928f74ad1c47bc625cd55fd9675f61e3a21ceb Explicit source-compilation target selection 47e33ae90ec77b176597e45d7917694749526aba Hierarchical canonical unit-map emission, removing the 700-unit ceiling across the mode-1 pipeline The final checkout is clean on main, and an independent remote check confirmed origin/main at 47e33ae90ec77b176597e45d7917694749526aba.

Complete source-driven Tier 2 self-hosting remains open. The completed capacity outcome is the expandable mode-1 unit-map path, supported by exact-tree acceptance and integration.

  1. Implemented capability and capacity changes Explicit target selection The source compiler now accepts LKJSRQ01 profile 1, containing an explicit canonical Target identity and the complete LKJSG001 carrier. Admission checks all supplied owners and types, including unused definitions, untaken branches, and unselected targets, before selecting the executable target.

The admitted entry signature remains the restricted scalar command port () -> I64. The compiler’s own (Bytes) -> {diagnostic: I64, image: Bytes} source-level entry signature remains a subsequent dependency. See the target-selection decision.

Expandable unit maps The 700-unit guard is removed coherently from:

Rust mode-1 projection. Self-hosted profile-5 admission. Unit-map construction. Generated object inventory. Artifact pack emission. The emitter retains the 64 KiB per-page invariant and constructs additional radix pages as necessary. Every child page enters the artifact inventory and pack. Physical pages are emitted deterministically in postorder, with the root included exactly once.

The representation preserves exact entry counts, logical-byte summaries, logical commitments, and physical digests. Generated frame lengths and offsets receive checked extent proofs before serialization. Recursion in map construction is bounded by the 17-byte key width; child iteration advances through nonempty groups.

An early parity check exposed unequal affine buffer state on new failure branches. Those paths now explicitly consume their live buffers through the existing core.buffer.discard primitive. Strict custody checks remain intact.

Canonical schema epoch 1 and the existing canonical unit/map/pack/artifact wire encodings remain unchanged. The compiler graph changes were adopted through two public transactions, each publishing once with differential equality. The complete design and termination argument are in the hierarchical-map decision.

  1. Actual validation and measured evidence Completed acceptance for the exact staged tree All required stages completed successfully for tree 32ff68b548b2fcb5aecd8c01229b8a7c757490d5:

Command or phase Actual result tools/bootstrap-verifier.sh --expected-source … --expected-tree … --output … Passed; bound to the base commit and exact staged tree bash tools/selfhost/verify.sh 128 self-host tests passed, 2 intentionally ignored; 10 native checks passed lkjscript-dev check changed --machine 29 fresh passes, 0 reused passes, stable inputs lkjscript-dev check full --fresh --machine --jobs 4 29 fresh passes, 0 reused passes, stable inputs lkjscript-dev release target Passed release-target policy check Final source and evidence checks Passed Commit/tree equality and normal push Passed; remote commit confirmed The literal self-host verification took 96m 48.388s, including compilation. The changed-file run took 2,585.722 seconds; the full fresh run took 2,335.630 seconds. These are verification observations, not a performance comparison between identical workloads.

Terminal review checked the exact registered gate names, uniqueness, exit status, freshness, unchanged source-input digest, matching verifier identity, evidence hashes, and the final staged tree.

Capacity and integrity controls The independent capacity fixture contains 800 units, including 799 unused functions with distinct 6,144-byte Text values:

Observation Measured result Mode-1 input 10,917,427 bytes Emitted artifact 11,179,173 bytes Unit-map pages 249 Native compiler stages Byte-identical artifacts from the same input through Tier 1 C1, C2, and C3 Loaded program behavior Result 42 in production VM and canonical reference Invalid unused unit beyond index 700 Rejected by every native compiler stage with diagnostic 10 Map tests additionally cover empty and singleton inputs, 752/753 and 896/897 leaf boundaries, and a 1,794-entry, three-level, 11-page hierarchy. Every emitted page is compared with the independent Rust builder at the same page size; logical commitments also agree with a smaller-page builder. Rehashed summary/content corruptions and missing-child controls reach the intended loader checks. Exact-fit and one-over arithmetic tests exercise extent boundaries without allocating multi-gigabyte buffers. These controls are described in the accepted decision and test contract.

Tier 1 fixed points These results use Rust-projected normalized inputs:

Workload Input Verified output Maintained native backend closure 858,136 bytes; 254 functions; 17,033 nodes C2 = C3, 2,676,552 ELF bytes Maintained mode-1 compiler artifact 9,323,887 bytes; 597 units C1/C2/C3 artifacts identical, 9,853,415 bytes Independent 800-unit capacity fixture 10,917,427 bytes C1/C2/C3 artifacts identical, 11,179,173 bytes Exact output SHA-256 values:

Tier 1 backend ELF C2/C3: e8a1d9eb93e29a7aa9cb49d03abc07fae85950e0f8281e5dc9f040a703d901f4

Tier 1 maintained .lkja through C1/C2/C3: d7c4aa68b5d12a07f90514d287cede7427e5e75a499edb149cf8970b492b9bfc

Tier 1 800-unit .lkja through C1/C2/C3: 737f18a830ae343e1c7715e840a22edc13507856a8475e7eb68dec745be552b3 Compiler-source behavioral mutation controls also passed. The combined source frontend/backend measurement covers 577 functions, 35,132 nodes, and 35 normalized types; its native source controls emit the scalar program returning 42 and reject a hash-consistent unused Bytes descriptor with diagnostic 13. The status record explicitly separates these results from the specification’s complete raw-source Tier 2 equations.

Inventory and resource observations Observation Accepted selector predecessor Integrated hierarchy revision Modules / pure functions / externals 72 / 560 / 23 72 / 569 / 24 Live owners / supplied types / retirements 34,006 / 35 / 12,009 34,550 / 40 / 12,612 Complete source-carrier bytes 8,201,410 8,422,624 Canonical compilation units 587 597 Physical pack files 390 472 Physical pack bytes 430,408,188 451,334,442 Current observations include 3,179,744 direct full-kernel work units, 8,258,577 composed callable work units, and 11,725,696 modeled metadata bytes. These remain separate from physical storage measurements.

The current active-feature profile includes 163 Text expressions, 91 List expressions, 28 structural-record descriptors, 14 generic application sites, one borrow parameter, and 163 consume parameters. Its call graph contains 172 recursive components and 769 syntactic tail-call contexts. These measurements are recorded against the current canonical revision in status.

No GC, history reseed, or identity-format cutover occurred. Native requested allocation, retained bytes, mapped capacity, and RSS were not measured in this slice.

  1. Remaining limitations and capacity boundaries Area Still open WS1 policies Kernel default/clamped 10M work policy, oracle 16M adapter, associated preparation, and change/authoring/inspection quota chains Mode 0 8 MiB input layout, 1,024 callable rows, 128 locals/operands, and signed-31-bit fuel domain Mode 1 and artifact layout u32 input/generated-pool offsets, 100,000 source/metadata-owner bounds, 8 MiB per-unit limits, table/instruction constraints, separate 10,000,000-unit manifest guard, and native 256 MiB per-value policy LKJSG001 Directory/object bounds and the positive proof-allowance domain Source-driven compilation Bytes/structural-record typing and binary-filter target signatures, complete generic-template admission, closed specialization, and affine branch/borrow/cleanup analysis Canonical .lkja derivation Source-derived canonical unit construction remains distinct from mode-0 native lowering Stack safety General mutual tail transfer, non-tail recursion, and cleanup-sensitive tail eligibility Full P self P self ​ Remaining owned nominal families, closures/invoke, explicit witnesses, associated types, source-tied read views, native lexical regions, and independent full-profile controls Identity and memory Retirement/history growth, broader identity-preserving editing, compact native layout, and measured same-process native phase reclamation The removed boundary is specifically the 700-unit map ceiling across the complete mode-1 path. The retained limits and next dependencies are documented explicitly in the accepted capacity decision.

  2. Tested source and carrier identities Acceptance base commit: 7d928f74ad1c47bc625cd55fd9675f61e3a21ceb

Accepted staged tree: 32ff68b548b2fcb5aecd8c01229b8a7c757490d5

Authoritative canonical project revision: rev_1c34f3f6a0fd193b5077c8ceaf6c10f078e16416b990e796542790e649910472

Semantic state: semantic_state_50c336e1c41ed4515a9ccb5c9db482c48f84513296d0dd22189e8dbc1e4b8cd5

Complete LKJSG001 carrier: 8,422,624 bytes SHA-256 0e8c5cd9644f5309f9c77cfad80a15c9a944af87c9328687ff194f493857d501 The complete carrier identity describes the authoritative supplied source. Complete Tier 2 compilation of that carrier remains an outstanding milestone.

  1. Integrated remote identity and receipts Integrated commit and independently confirmed origin/main:

47e33ae90ec77b176597e45d7917694749526aba Its tree is exactly the accepted staged tree. Integration used a normal fast-forward and push. The working tree is clean, and the existing stashes were preserved.

Terminal evidence is retained under:

/home/coder/workspace/lkjscript/.artifacts/selfhost/hierarchical-unit-map-acceptance/tree-32ff68b548b2fcb5aecd8c01229b8a7c757490d5/ Key receipt SHA-256 values:

full-receipt.json 6d8c592a1cde209e40d5736af155499ca65d670f2fb7e7f8aa7600308f23eefc

acceptance.json 47ca0fc1047000ebb69b1bdf21852c03dcc420d83c58616768fb86039f202543

publication.json f329f90b2c0bc4f5358816f1cbb0d7df91477ba209053613bb1a89a7849ead1b The committed status and decision files were frozen before gate execution. Their terminal acceptance and publication receipts now record the completed results and final Git identities.

  1. Next concrete dependency The next bounded source-lowering slice is direct self-tail transfer for admitted scalar functions, with argument-order, trap-order, and native frame-reuse controls. The live audit confirmed that both native emitters currently reuse frames only for direct self calls; mutual tail calls still use ordinary calls followed by epilogues.

After that, the source frontend needs Bytes/structural-record typing, source-derived type rows, and the compiler’s binary-filter signature, followed by generic-template admission, closed specialization, and affine cleanup.

The separate WS1 audit identified the accounting architecture for its next cutover: one exact remaining-work ledger shared across nested validation passes, with passive saturating telemetry kept separate. Applying it requires the kernel, repair, witness, oracle/associated preparation, and request/plan identity bindings to change coherently. That work is designed and audited; it has not yet been implemented.